VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Avionics / Interiors / Fiberglass > Glass Cockpit
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 09-07-2015, 02:41 AM
kai kai is offline
 
Join Date: May 2011
Location: Berlin, Germany
Posts: 84
Default Garmin G3X Touch Software V3.80 available

A new software V3.80 for the G3X Touch is available.
I?m wondering why Garmin did not mention that update here on VAF?
__________________
Kai

flying RV-9a, O-320, G3X Touch
a father&son project
Reply With Quote
  #2  
Old 09-07-2015, 07:53 PM
Icarus Icarus is offline
 
Join Date: Jan 2013
Location: D.C.
Posts: 303
Default Labor Day?

Its Labor Day here in the states...we even let the volunteers from Dynon take a day off!
__________________
Paul M.
Fayetteville, NC
Airport Bum
RV-4 / PA28-180
Reply With Quote
  #3  
Old 09-08-2015, 12:56 AM
kai kai is offline
 
Join Date: May 2011
Location: Berlin, Germany
Posts: 84
Default

Ah ok, didn?t know!
__________________
Kai

flying RV-9a, O-320, G3X Touch
a father&son project
Reply With Quote
  #4  
Old 09-08-2015, 08:11 AM
mturnerb mturnerb is offline
 
Join Date: Apr 2015
Location: Ponte Vedra, FL
Posts: 1,472
Default

Hoping the G3X team will post a summary of new features for this release!
__________________
Turner Billingsley

RV-14A built/sold N14VB
RV-10 in progress as of May 2020

https://tbrv10.blogspot.com/
https://turnerb14a.blogspot.com/
Reply With Quote
  #5  
Old 09-08-2015, 08:23 AM
marcusadolfsson marcusadolfsson is offline
 
Join Date: Feb 2015
Location: Gainesville, FL
Posts: 14
Default

From Garmin's site:

Changes made from version 3.70 to 3.80:
Add support for GPS 20A remote WAAS GPS receiver
Add support for GMC 307 mode control panel
Add support for GSU 25B ADAHRS
Add ability to set OBS navigation for internal GPS navigation source by touching CRS field on PFD
Add ability to change 'COM mutes ICS' and 'COM 3D audio' settings in normal mode
Add ability to access airport review page from COM frequency lookup page
Add ability to calibrate bus current inputs in millivolts per amp
Add ability to configure altitude alert volume level separately
Add Fuel Over Destination data bar field
Add Clear button to fuel flow calibration page fuel quantity value keyboards
Add configurable option to reset fuel-used value on first engine start or takeoff following a power cycle
Change ESP auto-LVL mode to be disarmed below 1500 feet AGL
Change fuel calc engine page Reset button to set only the fuel-used value to zero without changing fuel-remaining value
Improve map display when navigating to a user waypoint using external GPS navigation source
Improve RS-232 interface to GTS 8xx
Improve flight director operation for ILS approaches with unusual glideslope angles
Improve filtering of engine gauges
Improve landing gear warning alert logic
Improve NAV frequency tuning in systems with multiple radios or navigation sources
Improve flight log date display
Improve gauge precision for custom user analog voltage gauges
Improve layouts of fuel quantity reminder page and engine page fuel calculator tab
General improvements to system operation
Includes update to GDL39 software version 4.60
Includes update to GSA28 software version 3.00
Includes update to GSU25 software version 3.30
Includes GAD29 software version 2.20
Includes GEA24 software version 2.60
Includes GI260 software version 2.60
Includes GSU73 software version 3.40
Includes GTR20/200 software version 2.70
__________________
E-LSA Carbon Cub N80DB
Eclipse 500 N55TJ
Reply With Quote
  #6  
Old 09-08-2015, 09:42 AM
mturnerb mturnerb is offline
 
Join Date: Apr 2015
Location: Ponte Vedra, FL
Posts: 1,472
Default

Quote:
Originally Posted by marcusadolfsson View Post
From Garmin's site:

Changes made from version 3.70 to 3.80:
Add support for GPS 20A remote WAAS GPS receiver
Add support for GMC 307 mode control panel
Add support for GSU 25B ADAHRS
Add ability to set OBS navigation for internal GPS navigation source by touching CRS field on PFD
Add ability to change 'COM mutes ICS' and 'COM 3D audio' settings in normal mode
Add ability to access airport review page from COM frequency lookup page
Add ability to calibrate bus current inputs in millivolts per amp
Add ability to configure altitude alert volume level separately
Add Fuel Over Destination data bar field
Add Clear button to fuel flow calibration page fuel quantity value keyboards
Add configurable option to reset fuel-used value on first engine start or takeoff following a power cycle
Change ESP auto-LVL mode to be disarmed below 1500 feet AGL
Change fuel calc engine page Reset button to set only the fuel-used value to zero without changing fuel-remaining value
Improve map display when navigating to a user waypoint using external GPS navigation source
Improve RS-232 interface to GTS 8xx
Improve flight director operation for ILS approaches with unusual glideslope angles
Improve filtering of engine gauges
Improve landing gear warning alert logic
Improve NAV frequency tuning in systems with multiple radios or navigation sources
Improve flight log date display
Improve gauge precision for custom user analog voltage gauges
Improve layouts of fuel quantity reminder page and engine page fuel calculator tab
General improvements to system operation
Includes update to GDL39 software version 4.60
Includes update to GSA28 software version 3.00
Includes update to GSU25 software version 3.30
Includes GAD29 software version 2.20
Includes GEA24 software version 2.60
Includes GI260 software version 2.60
Includes GSU73 software version 3.40
Includes GTR20/200 software version 2.70
Thanks - I didn't know this was on the website.
__________________
Turner Billingsley

RV-14A built/sold N14VB
RV-10 in progress as of May 2020

https://tbrv10.blogspot.com/
https://turnerb14a.blogspot.com/
Reply With Quote
  #7  
Old 09-08-2015, 04:49 PM
dweyant dweyant is offline
 
Join Date: Sep 2012
Location: 07TS
Posts: 472
Default

Has anyone had issues with this upgrade?

I just went and installed mine on my dual screen G3X Touch system, and it basically bricked my primary screen.

It will boot, and work for 5-20 seconds then lock up and reboot

Any thoughts?

-Dan
__________________
Dan Weyant
RV-9A N96KD
Done and Flying 4/30/2015
Reply With Quote
  #8  
Old 09-08-2015, 05:14 PM
mturnerb mturnerb is offline
 
Join Date: Apr 2015
Location: Ponte Vedra, FL
Posts: 1,472
Default

Quote:
Originally Posted by dweyant View Post
Has anyone had issues with this upgrade?

I just went and installed mine on my dual screen G3X Touch system, and it basically bricked my primary screen.

It will boot, and work for 5-20 seconds then lock up and reboot

Any thoughts?

-Dan
I was going to install tomorrow - think I'll hold off until I hear more about this issue.
__________________
Turner Billingsley

RV-14A built/sold N14VB
RV-10 in progress as of May 2020

https://tbrv10.blogspot.com/
https://turnerb14a.blogspot.com/
Reply With Quote
  #9  
Old 09-08-2015, 06:02 PM
Mike H Mike H is offline
 
Join Date: May 2014
Location: Savannah
Posts: 806
Default

Anyone know if the new firmware will allow you to enter current aircraft hours to then be able to use the G3X to track aircraft total time?
__________________
Mike Hammond
A&P IA PPL ASEL
RV-14A kit S/N 140170
Reply With Quote
  #10  
Old 09-08-2015, 07:19 PM
humptybump humptybump is offline
 
Join Date: Feb 2011
Location: USA
Posts: 3,179
Default

I installed 3.80 Saturday and flew the "distillery" trip the same day.

I have a single screen G3X Touch GDU460, GSU25, GMC305, GAD29, GTR20, GDL39, and GSA28 servos. no engine monitor so I can not talk to those settings.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 03:38 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.