VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 08-08-2015, 08:03 PM
dspender dspender is offline
 
Join Date: May 2009
Location: Bay City, MI
Posts: 421
Default Forrest of tabs

Where can I get the 'forest of tabs' to mount on my firewall for my ground circuit? I am looking for a 'pass through' forest so I can ground aft and fwd of the firewall.
__________________
Dennis
Reply With Quote
  #2  
Old 08-08-2015, 08:13 PM
Mike S's Avatar
Mike S Mike S is offline
Senior Curmudgeon
 
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 15,420
Default

http://www.bandc.biz/grounding-suppl...ry-cables.aspx

This one also has a pass through bolt incorporated in the FOT. http://www.bandc.biz/groundblock24-tab.aspx



I would not worry too much about having tabs forward of the firewall-------there just in not much if any that you will ground that way FWF
__________________
Mike Starkey
VAF 909

Rv-10, N210LM.

Flying as of 12/4/2010

Phase 1 done, 2/4/2011

Sold after 240+ wonderful hours of flight.

"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."

Last edited by Mike S : 08-08-2015 at 08:16 PM.
Reply With Quote
  #3  
Old 08-08-2015, 09:19 PM
rv7charlie rv7charlie is offline
 
Join Date: May 2006
Location: Pocahontas MS
Posts: 3,884
Default

Purchasing makes a lot more sense, but you can make one if you're motivated. The dual Faston tabs can usually be sourced on ebay. I made my FOT using a blank solid brass electrical switch plate, tabs, and a brass toilet hold down bolt for the pass-through.

Charlie
Reply With Quote
  #4  
Old 08-10-2015, 09:27 AM
dspender dspender is offline
 
Join Date: May 2009
Location: Bay City, MI
Posts: 421
Default

Thanks for the guidance.
__________________
Dennis
Reply With Quote
  #5  
Old 08-10-2015, 07:11 PM
DragonflyAero DragonflyAero is offline
 
Join Date: Jan 2013
Location: Greensboro, NC
Posts: 173
Default

Aircraft Spruce has them.

http://www.aircraftspruce.com/catalo...clickkey=35082

I used the 24 tab one sided on my -7.
__________________
Bill Vinson
RV-7 Standard Build
http://www.mykitlog.com/users/index....r&project=2226
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 02:02 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.