VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Main > RV Ongoing Maintenance Issues
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-03-2015, 01:57 PM
LeMar LeMar is offline
 
Join Date: Dec 2008
Location: Sioux Falls, SD
Posts: 86
Default Taiwheel bushing

I see past posts about replacing the stock Van's tailwheel assy with another brand when the bushing goes bad but I haven't seen much about replacing the bushing in the stock unit.
Anyone have a manufacturer's part number for the original bronze bushing?
I understand that a little machining is required but that doesn't appear too difficult to do.
Reply With Quote
  #2  
Old 08-03-2015, 03:11 PM
vfrazier's Avatar
vfrazier vfrazier is offline
 
Join Date: Jan 2007
Location: Mount Vernon, IN
Posts: 1,270
Default

No real machining is required just to replace a bushing. You can "machine" the required groove with a steady hand and a Dremel tool. Done it many times.

The hard part is getting the old bronze bushing out. Get a chisel, hammer, and be prepared to chip it out.

New bushings can be found online or at any bearing supply store.

If you have access to a milling machine, or are creative with a drill press and vise, a 5/8" end mill will make short work of machining the required groove mentioned above.

If you built an airplane, you can do this job. Or you know someone who can!!
__________________
Vince Frazier
www.f1aircraft.com
F1 Rocket and F4 Raider components
1-888-F1AIRCRAFT (1-888-312-4727)
www.flyboyaccessories.com
RV and Rocket Accessories, Tailwheels, Tools, & More
1-888-8FLYBOY (1-888-835-9269)

F4 Raider - under construction
F1-H Rocket "Crazy Horse" - sold
RV-4 "Chief Pontiac" - sold in 1994, purchased in 2018
Reply With Quote
  #3  
Old 08-13-2015, 01:18 PM
StoneAge StoneAge is offline
 
Join Date: Jul 2015
Location: Creswell, Oregon
Posts: 11
Default

I ordered a new bushing from McMaster-Carr

Part # 9368T157 "Bronze Sleeve Bearing, for 1/2" shaft diameter, 5/8" OD, 1-1/2" length"

Be sure to measure YOUR tailwheel to ensure fit.
__________________
-- David
RV-4 IO-320 FP prop (Purchased flying)
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 11:52 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.