View Single Post
  #4  
Old 02-25-2016, 12:03 AM
bruceh's Avatar
bruceh bruceh is offline
 
Join Date: Mar 2008
Location: Ramona, CA
Posts: 2,423
Default

I had an issue with the VP-X +2.5V power pins on J1 not putting out any voltage. It is easy to check with a voltage meter. If the poteniometer in the trim unit doesn't get any voltage it will always report the same value (in my case 0) for any position. I ended up sending the VP-X back for repair and that fixed it.
__________________
Bruce Hill
RV-9A N5771H flown over 800 hours!
http://www.overthehills.com/RV-9A-Project
APRS Tracking for KJ6YRP and New Flying Blog
2020 VAF donator
EAA Tech Counselor, Build assistance - canopy/tanks/fiberglass/electrical/repairs
Reply With Quote