After all the tales of whoa, surprisingly mine fit with lots of trials and small cuts at baffle side. No butchering and glass work. Appears it is designed to fit a real Lycoming and not a clone. Getting the filter in was challenging due to tight space. I had to take a lot off of the cowl and made a filter cover cap that tied in the snorkel side, side baffle and cover. RV-7A, Vans standard Lycoming IO-360 180 hp.
Scott- 2022 donation
New RV-7A N579RV, just over 190 hours now
Built RV-12, 328 hours-sold, purchased RV-12 sold, Built RV-9A, 536 hours-sold, Not completed RV-7 sold, Built Kitfox sold