What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Dynon Remote Compass

A

Aden Rich

Well Known Member
Does anyone have a picture of the mounting setup for the their Dynon Remote compass in a RV-6/6A?
I have a D10A and will need to see how it gets mounted.

Thanks,
Aden
 
aft of baggage compt.

No photos handy, but I made my own mount out of scrap in the hangar, and placed the unit on the center vertical stiffener towards the top of th fus. Works fine.
 
tail area mount, RV-6A

Here's page with pictures of my installation in RV-6A that has been working fine for 260+ hours:

http://rv6aproject.ckhand.com/panelAndElectrical/panel/panelPg5.htm

Dynon_EDC_installation001.JPG


RV-6AN731CK4.JPG
 
Dynon Mount

I purchased the SafeAir unit.
Don't need to reinvent the wheel.
I appreciate the inputs.
One last question!
Can I run the remote compass wiring along side the strobe light wiring?
I have one power pack that will run both strobes so the wiring will have high voltage in it.


Thanks again,
Aden Rich
 
thread drift - graffiti

Reminds me of the bathroom at "Spankys".
Click to expand...

:) yea, but it's sentimental graffiti so it has to stay! That was my youngest kid's contribution when she wanted to come out to the garage and help me work on the plane - notice it's upside down from when the fuselage was in the jig. I look forward to reviewing that graffiti every year when condition inspection time rolls around. She's in high school now and is proud to know it's still there! See thread on kids in the workshop, post #2:

http://www.vansairforce.com/community/showthread.php?p=588295#post588295
 
Last edited:
OneCharlieKilo said:
:) yea, but it's sentimental graffiti so it has to stay! That was my youngest kid's contribution when she wanted to come out to the garage and help me work on the plane - notice it's upside down from when the fuselage was in the jig. I look forward to reviewing that graffiti every year when condition inspection time rolls around. She's in high school now and is proud to know it's still there! See thread on kids in the workshop, post #2:

http://www.vansairforce.com/community/showthread.php?p=588295#post588295
Click to expand...

This interior picture is twenty times better than mine. I miss my kid "helping" me on my project. You're right! That is a great archival memory.
 
I too have purchased the Safe Air compass mount in anticipation of mounting my Dynon D10A in the wingtip. My RV6 has wingtip strobes too. I have the same question as Aden. Will this be an issue?
 
You must log in or register to reply here.
Back
Top