View Single Post
  #1  
Old 06-07-2019, 06:39 AM
Maxrate Maxrate is offline
 
Join Date: Dec 2008
Location: League city, TX
Posts: 598
Default Hardware help (Brake Master Cylinder Reservoir)

So I'm helping a friend on his condition inspection and his brake MC reservoir has come loose over time. Were looking for a fitting that will allow the reservoir to be tightened with the MC and stay aligned. The original builder just TIG welded the thing on. Both are 3/8 pipe thread. I searched the spruce catalog and couldn't find a good option. Just trying to help a friend...

__________________
Mark Malone, RV7
Wings complete, SB 14 complied with, canopy and cowling in progress, Up on the gear.
N442MM reserved
http://www.mykitlog.com/MikeMike

2021 Donation gladly paid..