View Single Post
  #22  
Old 06-08-2021, 01:25 PM
wirejock's Avatar
wirejock wirejock is offline
 
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 4,601
Default Nutplates

Quote:
Originally Posted by Vfr1200 View Post
New build question

Searching for a chart on what size the center hole for a certain nut plate

Example K1000-4 nut plate the center hole get drilled to a final size ???

Iím struggling with the terminology of the bolt sizes drill sizes etc..

Thanks
I don't recall a chart. Maybe someone will post.
For now, here's the common ones.
Nutplate=bolt=drill
K1000-06= #6=#29
K1000-08=#8=#19
K1000-3=3/16"=#12
K1000-4=1/4"=1/4"
K1000-5=5/16"=5/16"
K1000-6=3/8"=3/8"
__________________
Larry Larson
Estes Park, CO
wirejock at yahoo dot com
Donated 01/01/2021, plus a little extra.
RV-7A #73391, N511RV reserved (2,000+ hours)
Empennage, wings, fuse, finishing kit, now FWF
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
Reply With Quote