Originally Posted by Radomir
Does the clutch engage? There's a separate solenoid that engages the motor to the controls.. apply power to pins 1 and 2 (power on 1 and ground on 2) and you should hear a click and the stick should get stiff (clutch engaged)...
Sounds like this is not happening. Motor runs (follows the turn knob), but no mechanical force on stick at all. Will troubleshoot IAW your guidance and see what happens. Thanks.
WARNING! Incorrect design and/or fabrication of aircraft and/or components may result in injury or death. Information presented in this post is based on my own experience - Reader has sole responsibility for determining accuracy or suitability for use.
Harmon Rocket II -SDS EFI
RV-8 - SDS CPI
1940 Taylorcraft BL-65