Originally Posted by wjb
Yes! Exactly what I have and is exactly what I'm seeing ... I was puzzled by everyone who had the snorkel "just fit"; you can't really mess this up given the non-negotiable locations of the servo intake and left ramp.
I'm feeling "son of FrankenSnorkel" coming soon.
How did you support the center section when you glassed it? foam inside? Did n't look like it..
I screwed each end of the snorkel to their positions on the fuel injection servo and the baffle, then laid two pieces of wetted cloth in place to bridge the gap. This essentially tacked it all into a single piece. The gap between the pieces was small enough that the cloth didn?t sag. Once cured, I removed the snorkel and laid up the rest of the fiberglass.
Sid "Scroll" Mayeux, Col, USAF (ret)
52F NW Regional/Aero Valley Airport, Roanoke TX (home of DR's Van Cave)
"KELLI GIRL" N260KM RV-7A tipper
Proud and grateful 2022 -=VAF=- Contributor
PS: I am not an influencer. I have no influence. Just ask my kids.