NovaBandit
Well Known Member
Looks like Garmin just released v5.1 for the G3X Touch.
I'm very happy to hear they made the GEA24 GP pins usable as discrete inputs! Especially since I was flying before the GAD27 was made available... I'm going to have to revisit my wiring diagram to see if it's worth a little rewire to take advantage of this!
Changes made from version 5.00 to 5.10:
Add ability to configure GEA 24 general-purpose (GP) inputs as additional discrete inputs
Add discrete input configuration to swap frequencies on selected COM radio (requires GMA 245/245R)
Add option to configure distance to destination (DISTD) field in data bar
Change flight director TO mode to always disengage autopilot when activated
Change flight director GA mode to disengage autopilot if minimum airspeed is not configured
Change weight & balance configuration to allow weights up to 99999 units
Improve fuel calculator +/- buttons to more easily enter quantity of fuel added or subtracted
Improve GDU 46x MFD page navigation display when split screen is on right side
Improve engine page display
Improve map airspace labels
Improve transponder status display
Improve Bluetooth & Connext interface
General improvements to system operation
I'm very happy to hear they made the GEA24 GP pins usable as discrete inputs! Especially since I was flying before the GAD27 was made available... I'm going to have to revisit my wiring diagram to see if it's worth a little rewire to take advantage of this!