View Single Post
Old 01-08-2020, 10:33 PM
vernh59 vernh59 is offline
Join Date: Jan 2009
Location: Ozark, AL
Posts: 87

Been busy with the holidays and such but still working.

Starting work on the spar carry through. Installing nutplates.

Nutplates installed

Fitting the end pieces

Bulkhead stiffeners fitted

Fitting cover plate supports.

Rivets installed. I used the squeezer where it would reach. Once again, it had been awhile since I installed any rivets and it showed.

Finished except for the spar spacers. Had to order -14 rivets. They may be here somewhere.

Per the instructions, I assembled the control sticks then removed them. Ill put this bulkhead aside for now.
Fly safe,
Ozark, Al
RV-7 Build No. 71139
Empennage Complete, Wings on hand
Starting Fuselage 11/15/19
Exempt but gladly donating!
Reply With Quote