View Single Post
  #3  
Old 05-07-2021, 10:01 AM
wirejock's Avatar
wirejock wirejock is offline
 
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 4,592
Default Drill bits

I have Harbor Fright bit set. Mostly use numerical but occasionally grab the alpha buts when drilling something that dulls bits.
I always finish with a reamer.
Common sizes
40, 30, 19, 12, 3/16, 1/4, 5/16 covers most.
Vans calls out an oddball for gear legs. .311"
__________________
Larry Larson
Estes Park, CO
wirejock at yahoo dot com
Donated 01/01/2021, plus a little extra.
RV-7A #73391, N511RV reserved (2,000+ hours)
Empennage, wings, fuse, finishing kit, now FWF
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
Reply With Quote