View Single Post
Old 12-26-2020, 08:10 AM
Allan Stern Allan Stern is offline
Join Date: Jan 2006
Location: Cape Coral, Florida
Posts: 281
Default Glare shield covering

I purchased a piece of naugahide from an upholstery shop and used contact cement to glue it down before attaching the canopy. Then a piece of edge roll pushed over the edge to give a nice finished look. Don't forget to add the black stripe to lower edge of the canopy that would mask the front edge of glare shield by the front. I dyed the fiberglass resin black.

140507 N507 PW flying
2020 donation made
Reply With Quote