View Single Post
  #3  
Old 09-17-2019, 08:40 PM
Coaltowngarage Coaltowngarage is offline
 
Join Date: Aug 2019
Location: Altoona,AL
Posts: 49
Default

My plans show the half rib piece and two gussets tying the aileron bellcrank rib and the adjacent outboard rib together. One on the top skin and one on the bottoon these wings, the gussets only span about 4 inches from the aileron crank rib. There are 4 rivets with 3/4 spacing tying the gusset to the skin. If the consensus is that i need to replace them with ones that span between the two ribs, thats what ill do. I think its doable on the closed up skin via the access cover but i bet itll be a joy.
Reply With Quote