View Single Post
  #12  
Old 10-04-2020, 11:28 PM
CubedRoot's Avatar
CubedRoot CubedRoot is offline
 
Join Date: Sep 2013
Location: Ooltewah, TN.
Posts: 585
Default

Well gents, I made the leap and cut my tubes tonight. I used the bolt-in-the-bench method to figure out what length the tubes needed to be cut to assure the 69 9/32" total length from the rod end to rod end.

It appears that for my tubes, 66" of length, maybe 65 15/16", would be the ideal length. This let me thread my rod ends to the halfway point on their threads, AND gave me 1/4" of clearance for the rivets in the VA-111 end joint.

I detail it here on my blog post: https://theskunkwerx.com/rv7/aileron...-tubes-part-2/

Really happy with the way they came out for now. I hope that 69 9/32" is the exact length we need. I am only halfway on the threads on each heim joint / rod end so there should be plenty of adjustability.
__________________
Lynn Dixon
RV-7 Slider -
Tail kit Completed - March 2017
Wing Kit Started - June 2017
My Build Log: http://www.theskunkwerx.com
Reply With Quote