Quote:
Originally Posted by rileyspoon
I've already attached my rudder and stabilator and all the antiservo hardware but it looks like the assembly instructions for the fairings requires all that to be removed. Has anyone done this step without removing the rudder and stabilator?
|
I did it with the stabilator and rudder on (see my blog) then bragged that I was going to fly the airplane after having installed the stabilator only one time. When the time came to move the project from NC to Colorado, it wouldn't fit in the 18-wheeler with the stab on! Had to remove it, necessitating a re-do of the cable tensioning (an odious task).
Jerre
jerre-hill.blogspot.com