View Single Post
Old 07-29-2021, 09:50 AM
Anders Anders is offline
Join Date: Aug 2018
Location: Norway
Posts: 3
Default Numatx HTS-C3K3 - Problem solved

I have a Numatx HTS-C3K3 squeezer that has been working well since I bought it 2,5 years ago. In April this year it started to leak air from the pedal when not in use. It still worked. I contacted Numatx ( and they sent a new pedal which did not help. After some more communication they informed me that the unit was out of warranty, but that I could send them the unit for repair, but I would have to carry the freight both ways and the repair cost.

I then decided to open the intensifier that I expected was the culprit. Very much so. The piston plate had ben unscrewed from the piston rod (see picture). I cleaned the parts screwed the plate back on the rod, added some hydraulic fluid and closed the intensifier.

Now works as before.


Attached Thumbnails
Click image for larger version

Name:	20210729_161735.jpg
Views:	42
Size:	274.7 KB
ID:	14128  
Anders Nilsson
(Norway, Saab Safir driver)
RV14 Kit #140529
Empennage done
Tailcone done
Working on fuse
QB wings on order
Reply With Quote