View Single Post
  #6  
Old 12-07-2020, 08:46 PM
GOFT GOFT is offline
 
Join Date: Nov 2013
Location: Canada
Posts: 62
Default RV 14 heat muffs

Timely!
I found that the heat muffs keeps loosening after a few hours of flying. Tightening the "hose" clamps deformed the very flimsy/fragile endplates.

Just replacing the endplates are not an option. Did so and it failed a second time.

One solution might be to install two endplates (back to back) on each end of the muffler to beef up the surface area and strengthen the endplates so that the clamp force can be increased.

Are thicker/heavier end plates available or any other solutions out there?

Thanking a solution in advance :-)
Reply With Quote