View Single Post
  #3  
Old 01-06-2012, 06:58 PM
vmirv8bldr's Avatar
vmirv8bldr vmirv8bldr is offline
 
Join Date: Jun 2005
Location: Eastvale, CA
Posts: 378
Default Check clearance

Be sure to check your clearance on the left side before using hinges. Mine was actually in contact with Cyl #2 and I had to re-do it. All is well now and I have about 1/4" of clearance there,but it was a ton of extra work. I used the Dan Horton method and laid up the joggle instead of using hinges or the camloc mounting strip. I used nutplates on the horizontal interface to get the clearance. Hing eyes will eat about 1/16th. Do a search and you'll see my thread with pics, it was pretty recent, month or two ago.
__________________
Bart Filipiak
Eastvale, CA
RV-8 N74VB

Barrett IO-390
WW200RV
FLYING!!!!!!!
Reply With Quote