What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Numatx HTS-C3K3 - Problem solved

Anders

I'm New Here
I have a Numatx HTS-C3K3 squeezer that has been working well since I bought it 2,5 years ago. In April this year it started to leak air from the pedal when not in use. It still worked. I contacted Numatx (hy-technic.com) and they sent a new pedal which did not help. After some more communication they informed me that the unit was out of warranty, but that I could send them the unit for repair, but I would have to carry the freight both ways and the repair cost.

I then decided to open the intensifier that I expected was the culprit. Very much so. The piston plate had ben unscrewed from the piston rod (see picture). I cleaned the parts screwed the plate back on the rod, added some hydraulic fluid and closed the intensifier.

Now works as before.

Regards

Anders
 

Attachments

  • 20210729_161735.jpg
    20210729_161735.jpg
    274.7 KB · Views: 96
Back
Top