View Single Post
Old 10-02-2008, 12:03 PM
Kahuna's Avatar
Kahuna Kahuna is offline
Join Date: Dec 2004
Location: Gold Hill, NC25
Posts: 2,408

I went through a couple of weeks of madness trying to get my i-gate set up.
First problem was I could not get my hardware to keep the soundcard drivers active. Turned out to be that when using RDP to control the remote server, the sound gets selected from the controlling computer, disabling the card on the controlled computer. ARGH!!!!! Once I told RDP to leave the sound on the host, wallah, the sound card stayed alive on the server. Most folks would not run into this problem. Most admins like me never care about sound over RDP. But this time was different. TOok me many many hours of debugging.

Next item was connecting to the aprs server. I found the key to be downloading the proper list. However I could not get the list to d/l through the menu selection on UI-View. I found that the default location to get the list is no longer active. You should put in

This allowed the current list to be downloaded. I found several helpful hits on setup here.

Which ARPS server you gate to is up to you. I use this one.;Universal connection for servers in North America

6A, S8 ,
Gold Hill, NC25
Reply With Quote