View Single Post
Old 01-21-2021, 08:18 PM
PilotjohnS PilotjohnS is offline
Join Date: Jan 2016
Location: Southwest
Posts: 1,414
Default A little mistake

Originally Posted by John Tierney View Post
Here's where I put mine on an RV-7A, based on others examples, and it has worked OK.
The second ANL holder is empty, for a future backup alternator if needed.
I think I got the ANL holders with covers from West Marine.
I made a little mistake in my layout. It is hard to get to the sense screws on the shunt. I got it wired but it is going to be tough to change the shunt wires if I ever have to. Oh well. Good thing I dont have to pay anybody to work on it!
John S

WARNING! Information presented in this post is my opinion. All users of info have sole responsibility for determining accuracy or suitability for their use.

Dues paid 2021, worth every penny

RV9A- Status:
Tail 98% done
Wings 98% done
Fuselage Kit 98% done
Finishing Kit 35% canopy done for now
Electrical 85% in work
Firewall Forward 5% in work
Fiberglass 0%, thought i was building in metal?
Reply With Quote