Loctite selection

Gents,

I'm final-installing those fuel and brake lines and want to use Loctite on the AN fittings, in both systems. What is the recomended Loctite series for the job, and are there good (but less expensive) brand names that would be equally good?

TNX and
BSTRGRDS
Mike

RV-7A 4X-ORV (res)
Installing systems.

As far as I know, AN fittings are to be installed dry. For the pipe thread fittings, I used ezturn (fuelube).

On pipe threads I used loctite Quickstix 561 PST. Looks like a big chapstick. Hmm I wounder if......
Anyway no leaks.

For NPT threads, Loctite 567 PST. For the AN sides, dry.