VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.


Go Back   VAF Forums > Search Forums
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Showing results 1 to 64 of 500
Search took 0.05 seconds.
Search: Posts Made By: lr172
Forum: Traditional Aircraft Engines Today, 07:34 AM
Replies: 8
Views: 3,903
Posted By lr172
Pls read post #3. Allen builds engines for a...

Pls read post #3. Allen builds engines for a living.
Forum: Traditional Aircraft Engines Today, 07:20 AM
Replies: 8
Views: 657
Posted By lr172
I have 750 hours on the 320 in my 6a. I do not...

I have 750 hours on the 320 in my 6a. I do not lean on the ground (though idle mixture is properly set) and have done MANY x-ctry flights in the winter with cht’s around 300* or less. I am lop 95%...
Forum: RV General Discussion/News Today, 07:06 AM
Replies: 29
Views: 1,162
Posted By lr172
From an electron flow perspective, they are thr...

From an electron flow perspective, they are thr same. However, if the electrons flow back to the mag via the shield,, that surrounds the center core, it helps to cancel out EMI. The benefits only...
Forum: RV-4 Yesterday, 08:01 AM
Replies: 8
Views: 371
Posted By lr172
Gear leg fairings are really small rudders. I...

Gear leg fairings are really small rudders. I suspect they are a likely cause of yaw oscillations if they are loose.
Forum: Propellers Yesterday, 07:46 AM
Replies: 1
Views: 171
Posted By lr172
Prop manufacturers sometimes provide guidance on...

Prop manufacturers sometimes provide guidance on rpms to avoid in certain engine prop combinations. I would be following the prop manufacturers guidamce, not dynon’s on what rpms to avoid.

Larry
Forum: RV-9/9A Yesterday, 07:38 AM
Replies: 9
Views: 1,100
Posted By lr172
The head creates less drag than the nut plus...

The head creates less drag than the nut plus threaded portion. Not a flight safety issue, so no need to account for failure modes.
Forum: RV-4 Yesterday, 07:29 AM
Replies: 1
Views: 194
Posted By lr172
I believe these planes are designed to fly +/- 1*...

I believe these planes are designed to fly +/- 1* from longerons level in cruise. However, weight loading and speed changes that somewhat. Variances in Actual wing and h stab incidence can change...
Forum: Electrical Systems Yesterday, 07:14 AM
Replies: 5
Views: 223
Posted By lr172
Seems way easier to buy a handheld comm to get a...

Seems way easier to buy a handheld comm to get a clearance. You can put the first couple of waypoints or the sid in the gps while the engine is warming up. At most airports, i can get my clearance...
Forum: RV-7/7A Yesterday, 07:07 AM
Replies: 17
Views: 1,154
Posted By lr172
Loose bearings can create brake dragging. 25 psi...

Loose bearings can create brake dragging. 25 psi is way too low IMHO. Possible that tube blew and the now deflated tube was causing an excessive bending moment on the wheel , due to the loose...
Forum: RV General Discussion/News Yesterday, 06:51 AM
Replies: 29
Views: 1,162
Posted By lr172
The switch should be connecting that grd terminal...

The switch should be connecting that grd terminal to the other terminal with the plead attached and not to the frame ground.
Forum: RV-4 Yesterday, 06:41 AM
Replies: 8
Views: 371
Posted By lr172
I have built a 6 abd a 10. Both exhibited...

I have built a 6 abd a 10. Both exhibited stability in yaw. They have a tendency to find their position and hold it. A trim tab will move that position around, but will not address your...
Forum: RV General Discussion/News 06-14-2021, 07:46 AM
Replies: 29
Views: 1,162
Posted By lr172
The p lead is noisy and you want to use the...

The p lead is noisy and you want to use the shield to go directly back to the mag to self-cancel, when grounded. One end of shield should connect to the mag ground screw and the other to the other...
Forum: Temp / Test / Misc. (posts deleted after 2 weeks) 06-14-2021, 07:06 AM
Replies: 7
Views: 886
Posted By lr172
Hope you get a tire. I am not sure I would...

Hope you get a tire. I am not sure I would lainch without identifying the root cause of the locked brake. Heat is not a reasonable cause of locked brakes, IMO. Something else is going on. Do you...
Forum: RV General Discussion/News 06-14-2021, 06:44 AM
Replies: 7
Views: 382
Posted By lr172
I use powersonic as well and happy with their...

I use powersonic as well and happy with their performance.
Forum: VAF Classifieds (posts in here deleted after 30 days) 06-11-2021, 07:09 AM
Replies: 6
Views: 437
Posted By lr172
Sorry, but in the US, the law is a combination of...

Sorry, but in the US, the law is a combination of regulations AND interpretations of the court, as well as precedence. A popular example is Roe v. Wade. You will not find a reg that makes abortion...
Forum: RV Ongoing Maintenance Issues 06-10-2021, 06:46 AM
Replies: 4
Views: 333
Posted By lr172
Safe air style quick drains have an oring inside...

Safe air style quick drains have an oring inside them that can leak over time. Simple replacement.

Only fix on the pump is to remve it and install with new gasket.

Larry
Forum: Glass Cockpit 06-10-2021, 06:41 AM
Replies: 13
Views: 1,006
Posted By lr172
Let us know how it works out. I am anxious to...

Let us know how it works out. I am anxious to get the new sw, but also scared away by the reports last round.
Forum: RV-10 06-10-2021, 06:21 AM
Replies: 8
Views: 640
Posted By lr172
I also made fiberglass pads that bridge over the...

I also made fiberglass pads that bridge over the hinge and create a place for a continuous seal.

Larry
Forum: VAF Classifieds (posts in here deleted after 30 days) 06-10-2021, 06:16 AM
Replies: 7
Views: 925
Posted By lr172
I was always told to never mix different weights...

I was always told to never mix different weights of multi-visc oil. It is ok to mix straight weight oils. It is my understanding that the different viscosity modifiers can sometimes have...
Forum: RV-10 06-08-2021, 07:52 AM
Replies: 5
Views: 454
Posted By lr172
May be a pain to dig them out of the pins.. ...

May be a pain to dig them out of the pins.. maybe consider making a mechanical switch instead. Probably a couple of bucks at digikey. Just need to make an adjustable holder.
Forum: RV Ongoing Maintenance Issues 06-08-2021, 07:20 AM
Replies: 19
Views: 798
Posted By lr172
Check he flared seat that the vernatherm nose...

Check he flared seat that the vernatherm nose seals against. These can become deformed and there is an SB on how to reform it. If the nose doesn’t seal, not all f the oil goes to the cooler

Larry
Forum: Traditional Aircraft Engines 06-08-2021, 07:01 AM
Replies: 12
Views: 1,461
Posted By lr172
likely culprits are a bad saender or wiring...

likely culprits are a bad saender or wiring isssues between sender and gauges. Best bet is to install a mechanical, non electric oil pressure gauge and test fly to rule in or out actual low pressure...
Forum: RV General Discussion/News 06-07-2021, 07:56 AM
Replies: 23
Views: 2,268
Posted By lr172
High EGT is a typical sign of retarded timing and...

High EGT is a typical sign of retarded timing and this occurs when only one plug fires. I would replace both plugs in #1 and test. You can even swap plugs from another cyl and see if problem moves....
Forum: RV General Discussion/News 06-07-2021, 07:27 AM
Replies: 20
Views: 4,934
Posted By lr172
I would add to your list vapor lock and other...

I would add to your list vapor lock and other fuel boiling problems, such as carb bowls overfilling and causing over-rich conditions to T/O risks after a quick stop. It seems many T/O accident...
Forum: RV-10 06-07-2021, 07:13 AM
Replies: 12
Views: 1,705
Posted By lr172
I did a long flight at 14K. I was at gross and...

I did a long flight at 14K. I was at gross and was getting 165 KTAS at around 9.2-9.3 GPH. I have std FI, with balanced injectors, and dual EI with variable advance. Otherwise, bone stock 540C4B5...
Forum: RV General Discussion/News 06-04-2021, 06:57 AM
Replies: 51
Views: 4,694
Posted By lr172
IMHO, there are seveal factors that drive that...

IMHO, there are seveal factors that drive that decision. First is a lack of knowledge. That also has several levels. Builder may not understand it is wrong or may not know the different levels...
Forum: RV-6/6A 06-03-2021, 11:14 AM
Replies: 20
Views: 1,194
Posted By lr172
The 6 tiedown ring is welded on to a relatively...

The 6 tiedown ring is welded on to a relatively thin piece of SS and bolted to an even thinner piece of aluminum. A longer arm on this ring could create enough leverage to bend it if you happen to...
Forum: RV General Discussion/News 06-03-2021, 11:09 AM
Replies: 19
Views: 1,115
Posted By lr172
I originally had the GA-35 under the cowl. Had...

I originally had the GA-35 under the cowl. Had two GPS losses (~ 5 minutes each), while IFR (luckly just enroute) and subsequently moved it to the top of the fuse and have not had a problem...
Forum: RV-7/7A 06-03-2021, 09:15 AM
Replies: 9
Views: 503
Posted By lr172
I am a fan of the UREM37BY as it is designed to...

I am a fan of the UREM37BY as it is designed to minimize lead fouling problems. It requires the smaller caps on the harness though.

Larry
Forum: RV General Discussion/News 06-03-2021, 08:58 AM
Replies: 19
Views: 1,115
Posted By lr172
While many don't like this and I understand why,...

While many don't like this and I understand why, all of the FW pass throughs called out in the RV10 manual use a plastic grommet with no other sealing. Clearly this is ok with the kit developer, but...
Forum: RV-10 06-03-2021, 08:48 AM
Replies: 5
Views: 1,312
Posted By lr172
If you still have enough thread engagement, you...

If you still have enough thread engagement, you can extend the heim out a few turns so that the nut clears the hex rod. I believe this was discussed in the manual and that is the reason the heim...
Forum: RV-10 06-03-2021, 08:43 AM
Replies: 5
Views: 1,312
Posted By lr172
rubbing of control rods = bad. YOu need to keep...

rubbing of control rods = bad. YOu need to keep creating clearance until the rubbing ceases. Trust me, you will like that your ailerons move when commanded more than you dislike the idea of cutting...
Forum: Traditional Aircraft Engines 06-03-2021, 08:16 AM
Replies: 10
Views: 447
Posted By lr172
Will take a look at that. However, if I had a...

Will take a look at that. However, if I had a reduced valve lift I would expect the low CHTs to follow into the full power range. Maybe that is a flawed assumption. Once in high power regime, the...
Forum: Traditional Aircraft Engines 06-03-2021, 08:13 AM
Replies: 10
Views: 447
Posted By lr172
Thanks, good idea! I will try that.

Thanks, good idea! I will try that.
Forum: Traditional Aircraft Engines 06-03-2021, 08:11 AM
Replies: 10
Views: 447
Posted By lr172
That is a good point. This weekend I will do...

That is a good point. This weekend I will do another compression check. WHile I didn't do the wobble test on the intake valve, I did observe free movement of the valve when the spring was off. ...
Forum: Traditional Aircraft Engines 06-03-2021, 08:08 AM
Replies: 10
Views: 447
Posted By lr172
Good idea Bill. I will clean out the injector...

Good idea Bill. I will clean out the injector for safe measure. When I posted about spider blockage, it was a friend's plane, not mine and it was brand new, so not surprising to find a bit of...
Forum: RV General Discussion/News 06-03-2021, 07:58 AM
Replies: 43
Views: 4,340
Posted By lr172
Time is a big factor. I was paying a bit more...

Time is a big factor. I was paying a bit more than $900 for the 6A. 1000 hours with 700 in the 6 and IR. I added my son for his PPL training. Full coverage quote was $4500. Decided to go...
Forum: Traditional Aircraft Engines 06-03-2021, 07:33 AM
Replies: 5
Views: 270
Posted By lr172
It is technically a Shear Coupling. It is...

It is technically a Shear Coupling. It is designed of plastic or composites to allow it to shear in half and save your engine gears if the pump ever seized up. Unfortunately heat and time are...
Forum: RV General Discussion/News 06-03-2021, 07:16 AM
Replies: 51
Views: 4,694
Posted By lr172
Looking at your title, it is really sad that if a...

Looking at your title, it is really sad that if a mistake is made and repaired according the manufacturers guidance, someone will pop up and call that persons work "Miserable Quality"

While I...
Forum: RV General Discussion/News 06-03-2021, 07:01 AM
Replies: 33
Views: 5,223
Posted By lr172
V2 would be a popular upgrade ;)

V2 would be a popular upgrade ;)
Forum: Traditional Aircraft Engines 06-02-2021, 12:12 PM
Replies: 10
Views: 447
Posted By lr172
FI - 750 hours since overhaul in '15. Plugs are...

FI - 750 hours since overhaul in '15. Plugs are good. Get a solid EGT rise on both ignitions during runup and EGT is a bit on the low side and would expect a higher EGT if one plug wasn't firing. ...
Forum: Traditional Aircraft Engines 06-02-2021, 10:35 AM
Replies: 10
Views: 447
Posted By lr172
looking for Opinions: Low CHT

Recently, I have noticed that #2 is warming up, after cold start, about 30* cooler than the other cylinders and this is a new development. I can't find anything related to the baffling that has...
Forum: Traditional Aircraft Engines 06-02-2021, 08:31 AM
Replies: 8
Views: 404
Posted By lr172
I have never done it or considered it, but...

I have never done it or considered it, but probably no issue. Assuming you have a more modern sump that uses the oil pickup intregal to the sump casting, there is nothing sticking out more than an...
Forum: RV Ongoing Maintenance Issues 06-02-2021, 08:12 AM
Replies: 10
Views: 1,115
Posted By lr172
You may have something else going on. 13.8 volts...

You may have something else going on. 13.8 volts should be plenty to keep a battery at 90% charge. Clearly something has changed, but is it quite atypical for an alternator to just drop a few volts...
Forum: RV Ongoing Maintenance Issues 06-02-2021, 07:33 AM
Replies: 4
Views: 282
Posted By lr172
With a battery at only 50% charge, I am not...

With a battery at only 50% charge, I am not surprised that there is a slow ramp up in voltage. That is to be expected, as the alternator is pouring a lot of amps into it and this keeps the voltage...
Forum: Traditional Aircraft Engines 06-01-2021, 09:00 AM
Replies: 8
Views: 404
Posted By lr172
The Right Stuff is NOT RTV or at least not...

The Right Stuff is NOT RTV or at least not typical silicone RTV. It is black in color. It is more like construction adhesive than RTV. I would not expect any RTV sealant to work very long in this...
Forum: Traditional Aircraft Engines 06-01-2021, 08:51 AM
Replies: 8
Views: 404
Posted By lr172
While the best course would be to pull the pan...

While the best course would be to pull the pan and replace the gasket, I have a method that has worked for small leaks. Not a great fix, but can stem the tide until the proper repair can be...
Forum: RV Ongoing Maintenance Issues 06-01-2021, 08:44 AM
Replies: 18
Views: 884
Posted By lr172
agreed. $200 is a small price to pay for using...

agreed. $200 is a small price to pay for using fuel flow data to best manage the engine.
Forum: Glass Cockpit 06-01-2021, 08:17 AM
Replies: 15
Views: 1,219
Posted By lr172
Wink I am in the same camp. I feel the only thing...

I am in the same camp. I feel the only thing that I am missing is up to date obstacle data (technically on the ipad, but no EFIS warnings), but it seems that the really tall stuff (1000' TV antenna)...
Forum: Primers 06-01-2021, 07:52 AM
Replies: 6
Views: 288
Posted By lr172
Most Polyurethane paint systems rely upon...

Most Polyurethane paint systems rely upon chemical bonding, not mechanical, between the primer and the single stage paint coat. They typically give a max time window between THEIR primer application...
Forum: RV Ongoing Maintenance Issues 06-01-2021, 07:38 AM
Replies: 18
Views: 884
Posted By lr172
Mine started giving the same symptoms a week or...

Mine started giving the same symptoms a week or two ago. I pulled it and ran a bunch of carb cleaner through it and unfortunately no improvement, so that approach unfortunately is not universally...
Forum: RV-8/8A 06-01-2021, 06:33 AM
Replies: 9
Views: 548
Posted By lr172
Yes. more char

Yes. more char
Forum: RV General Discussion/News 05-31-2021, 01:06 PM
Replies: 26
Views: 2,298
Posted By lr172
I agree with a servo, but not a carb. If I take...

I agree with a servo, but not a carb. If I take my carb'ed engine to 10K DA it will be very rich at high power settings without using the red knob to lean. Lets say my engine wants 13 GPH at SL and...
Forum: RV Building Tips/Techniques 05-31-2021, 12:35 PM
Replies: 4
Views: 501
Posted By lr172
295uv is specifically designed for acrylic...

295uv is specifically designed for acrylic bonding and is the gold standard for securing acrylic windows in the marine industry. I struggle to believe it contains chemicals that are damaging to...
Forum: RV General Discussion/News 05-31-2021, 05:57 AM
Replies: 26
Views: 2,298
Posted By lr172
In the case of a carb, this is only true at red...

In the case of a carb, this is only true at red knob settings greater than what the carb needs to achieve that goal. Carbs do not have an adequate method of dealing with air density, the way that an...
Forum: Propellers 05-31-2021, 05:46 AM
Replies: 3
Views: 269
Posted By lr172
+1 From what I have read here, it also seems...

+1

From what I have read here, it also seems that 3 blade FPs give up a knot or two in speed at cruise relative to a 2 blade.
Forum: RV Building Tips/Techniques 05-31-2021, 05:35 AM
Replies: 7
Views: 760
Posted By lr172
I once had a similar situation (not from a rivet...

I once had a similar situation (not from a rivet gun, but similar) and tried to hammer it out with a hammer and dolly, like I would on a steel car body. The aluminum shrunk much more than steel from...
Forum: RV General Discussion/News 05-30-2021, 09:54 AM
Replies: 68
Views: 7,569
Posted By lr172
I did it once, but noticed during taxi that CHTs...

I did it once, but noticed during taxi that CHTs were rising much faster than normal. It pays to know how your engine typically behaves

Larry
Forum: RV Building Tips/Techniques 05-30-2021, 06:55 AM
Replies: 52
Views: 4,638
Posted By lr172
Again, an implication that build quality is being...

Again, an implication that build quality is being compromised. build quality falls into a least two different segments - structural integrity and cosmetic. I fully agree that we should not be...
Forum: RV General Discussion/News 05-30-2021, 06:32 AM
Replies: 26
Views: 2,298
Posted By lr172
When I visit Denver, I pull the knob back to a...

When I visit Denver, I pull the knob back to a bit less than I think will work and confirm that I am still plenty rich on the runup. Then, a couple seconds into the TO roll, I look at the EGT and...
Forum: VAF Classifieds (posts in here deleted after 30 days) 05-29-2021, 10:15 AM
Replies: 13
Views: 932
Posted By lr172
I like to be able to run the fuel near the...

I like to be able to run the fuel near the minimum if i ever get into a situation that warrants it. Also, the float senders are relatively accurate, but the redundancy of the ff data is comforting.
...
Forum: RV General Discussion/News 05-29-2021, 07:00 AM
Replies: 11
Views: 1,604
Posted By lr172
Most don't know this, but Chicago got that...

Most don't know this, but Chicago got that nickname from it's politicians (Wind bags), not from meteorologic wind. Chicago has been notorious for corrupt politicians for well over a century.
Forum: RV Ongoing Maintenance Issues 05-29-2021, 06:56 AM
Replies: 3
Views: 723
Posted By lr172
I have flown in the rain numerous times. No...

I have flown in the rain numerous times. No damage to my air filter and engine had no issue pulling air through the filter. The filter is made of cotton and it is soaked in oil. This prevents the...
Forum: VAF Classifieds (posts in here deleted after 30 days) 05-29-2021, 06:44 AM
Replies: 3
Views: 503
Posted By lr172
I have a new in th box version that goes in a 2...

I have a new in th box version that goes in a 2 1/4" panel hole. I will dig it up this afternoon and send a pic.

Larry
Showing results 1 to 64 of 500

 
Forum Jump

All times are GMT -6. The time now is 10:48 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.