VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.


Go Back   VAF Forums > Search Forums
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Showing results 1 to 64 of 500
Search took 0.04 seconds.
Search: Posts Made By: rv8ch
Forum: RV-7/7A Today, 11:06 AM
Replies: 6
Views: 65
Posted By rv8ch
You could probably do it with the tank on the...

You could probably do it with the tank on the wing, but it will be easier with it off. Specifically, you'll want to shake out any chips or other debris, which will be easier with just the tank. It...
Forum: RV-10 Today, 10:57 AM
Replies: 8
Views: 537
Posted By rv8ch
There are a lot of pictures of RVs on...

There are a lot of pictures of RVs on Kathrynsreport. From my very informal analysis, most non-fatals that end up there are flipped.

http://www.kathrynsreport.com

I assume that if I have a...
Forum: RV-10 Today, 08:17 AM
Replies: 12
Views: 642
Posted By rv8ch
I had been using various "OWT" methods on various...

I had been using various "OWT" methods on various aircraft for years, with what felt like random success/failure.

I now use Dan's "goldilocks/sweep" method for every start - and so far no trouble....
Forum: RV-8/8A Yesterday, 11:24 PM
Replies: 13
Views: 579
Posted By rv8ch
I have the "no tools adjustable" pedals and in...

I have the "no tools adjustable" pedals and in the most forward position they can just hit the firewall, so not sure how the "with tools adjustable" pedals can go further forward.
Forum: RV-4 Yesterday, 07:13 AM
Replies: 7
Views: 259
Posted By rv8ch
Great info - thanks gentlemen!

Great info - thanks gentlemen!
Forum: RV-4 Yesterday, 05:30 AM
Replies: 7
Views: 259
Posted By rv8ch
Dynafocal or Conical

Quick question - is it possible by looking at pictures to know if this a dynafocal or conical mount? Asking for a friend.

Lots of pictures here:

http://www.rv8.ch/rv-4-engine-replacement/

Here is...
Forum: RV-8/8A 05-14-2021, 02:10 PM
Replies: 5
Views: 272
Posted By rv8ch
I did both - once in the fuselage for the Trio...

I did both - once in the fuselage for the Trio servo, and then in the wing with the GRT servo. I found that the wing is easier to install, more solid installation, and easier to inspect.
Forum: RV General Discussion/News 05-14-2021, 03:44 AM
Replies: 41
Views: 2,886
Posted By rv8ch
Well said! I have not flown that many different...

Well said! I have not flown that many different types of aircraft, but gotta say I loved flying them all!
Forum: RV General Discussion/News 05-13-2021, 02:29 PM
Replies: 45
Views: 8,000
Posted By rv8ch
Great work, Dan! That's really fun data to look...

Great work, Dan! That's really fun data to look at.
Forum: RV General Discussion/News 05-13-2021, 02:20 PM
Replies: 22
Views: 1,304
Posted By rv8ch
shopping cart

Congrats, great work!

I'm sure it's there, but just to confirm - can I shop over a period of days/weeks/months and then pull the trigger when I feel I've got a decent amount of stuff to ship?
Forum: RV-8/8A 05-12-2021, 11:01 PM
Replies: 6
Views: 352
Posted By rv8ch
No problem. One thing to think about that I...

No problem. One thing to think about that I overlooked and need to correct is to try to have the bolt heads and screw heads on the baggage side if you can. This avoids having the "scratchy" bolt...
Forum: RV Building Tips/Techniques 05-12-2021, 10:51 AM
Replies: 20
Views: 1,658
Posted By rv8ch
I didn't use a nutplate jig, but almost every...

I didn't use a nutplate jig, but almost every time I put a nutplate in I wished I had a jig. Kind of like a band saw - I kept saying "I'm almost done, don't need one now" - but then I needed one. I...
Forum: RV-8/8A 05-12-2021, 10:46 AM
Replies: 6
Views: 352
Posted By rv8ch
Couple of things I would consider - rivnuts are...

Couple of things I would consider - rivnuts are known for coming loose. I used some in various places and wish I had not.

You probably want to keep the wiring runs as short as possible, to avoid...
Forum: VAF Classifieds (posts in here deleted after 30 days) 05-12-2021, 12:01 AM
Replies: 1
Views: 667
Posted By rv8ch
I just bought a new A20 so don't need this one,...

I just bought a new A20 so don't need this one, but those are the best photos of a headset I've ever seen. Very nice!
Forum: Traditional Aircraft Engines 05-11-2021, 11:52 PM
Replies: 13
Views: 829
Posted By rv8ch
Get ready to be...

Get ready to be double-shocked!

https://www.aircraftspruce.com/catalog/topages/timerite.php

It look like a pretty cool tool, I have to admit, probably a good candidate for a local chapter to put...
Forum: Traditional Aircraft Engines 05-11-2021, 10:48 AM
Replies: 23
Views: 1,329
Posted By rv8ch
My rubber wing fairing gap seals underneath the...

My rubber wing fairing gap seals underneath the wing could move about 1/16" and that was plenty to cause a nasty vibration. I "temporarily" put on some speed tape and it disappeared. I doubt this...
Forum: RV-14 05-11-2021, 12:53 AM
Replies: 15
Views: 3,158
Posted By rv8ch
I've accidentally bumped the controls getting...

I've accidentally bumped the controls getting into or out of an aircraft - please be careful, that could be the start of a bad day if it happens with the engine running and you just fell out of it...
Forum: Electrical Systems 05-11-2021, 12:08 AM
Replies: 42
Views: 2,182
Posted By rv8ch
That might already be ok if the battery tray is...

That might already be ok if the battery tray is well-grounded to the airframe. When I had my tray in the back it had several square inches of contact with the airframe, with I believe 3 10-32...
Forum: Safety 05-10-2021, 03:15 PM
Replies: 24
Views: 2,365
Posted By rv8ch
I think it's always valuable to have someone...

I think it's always valuable to have someone asking the "uncomfortable" questions, and challenging us. We're lucky to have this excellent forum where we can get the benefit of so much experience.
Forum: RV General Discussion/News 05-10-2021, 10:30 AM
Replies: 32
Views: 5,706
Posted By rv8ch
Google seems to read my mind - I just got this...

Google seems to read my mind - I just got this "Project Farm" video suggested where he evaluates various ceramic coatings. He always has a fun way of deciding how objectively measure...
Forum: Safety 05-10-2021, 09:42 AM
Replies: 24
Views: 2,365
Posted By rv8ch
Why not both? :D

Why not both? :D
Forum: Safety 05-10-2021, 06:03 AM
Replies: 24
Views: 2,365
Posted By rv8ch
Please tell me I'm an idiot

There have been some threads recently where people seemed to be unhappy when other forum members questioned the way that they have implemented something, or the device they installed or planned to...
Forum: RV-4 05-09-2021, 12:19 AM
Replies: 5
Views: 579
Posted By rv8ch
These guys have one. https://www.enginebridge.com

These guys have one.

https://www.enginebridge.com
Forum: Electronic Ignition Systems 05-09-2021, 12:16 AM
Replies: 39
Views: 2,153
Posted By rv8ch
https://www.surefly.aero/faq I've got two...

https://www.surefly.aero/faq



I've got two pmags which I like (so far), but if you are worried about a common "bug" hitting both pmags at the same time, the surefly seems like an option. Looks...
Forum: RV General Discussion/News 05-08-2021, 11:17 PM
Replies: 32
Views: 5,706
Posted By rv8ch
My painter said to use anything you would use on...

My painter said to use anything you would use on a car - doesn't matter. I've tried several things, and I can't get any of them to work badly. It seems like a situation where we've come a long way...
Forum: RV General Discussion/News 05-07-2021, 12:01 PM
Replies: 5
Views: 345
Posted By rv8ch
I'd get them to send you pictures of how they box...

I'd get them to send you pictures of how they box them when they ship them. Perhaps even send you an empty box with the correct packing foam, etc.
Forum: RV General Discussion/News 05-07-2021, 11:56 AM
Replies: 39
Views: 5,194
Posted By rv8ch
Not sure who said it, famous pilot or astronaut,...

Not sure who said it, famous pilot or astronaut, something like "if you are not at least a little bit nervous, then you probably don't understand the risk you are about to take."
Forum: Painting your RV 05-07-2021, 11:43 AM
Replies: 22
Views: 2,498
Posted By rv8ch
I laughed so loud at this my girl had to know...

I laughed so loud at this my girl had to know what it's all about. She suggested a naked man, and had some not very family-friendly suggestions for how he should look, sizes, and what he should be...
Forum: Safety 05-07-2021, 11:36 AM
Replies: 11
Views: 3,357
Posted By rv8ch
Very sad. FlightAware looks very...

Very sad.

FlightAware looks very strange.

11289

More info:

https://aviation-safety.net/wikibase/253804
Forum: RV Ongoing Maintenance Issues 05-06-2021, 12:35 PM
Replies: 18
Views: 1,008
Posted By rv8ch
carb cleaner

Aeromotive recommends carb cleaner for their stainless steel filters.

https://aeromotiveinc.com/wp-content/uploads/2019/03/TB-104-Cleaning-Stainless-Filter-elements.pdf
Forum: RV Ongoing Maintenance Issues 05-06-2021, 10:16 AM
Replies: 18
Views: 1,008
Posted By rv8ch
Anyone know what the filter size is at the fuel...

Anyone know what the filter size is at the fuel station pump? I guess there must be a standard, and I'm guessing it's bigger than 40 micron.

We had a presentation from a guy from Total at our...
Forum: RV-8/8A 05-05-2021, 08:33 AM
Replies: 8
Views: 490
Posted By rv8ch
My understanding, which is extremely limited, is...

My understanding, which is extremely limited, is that the main time you need to worry about the increased moment of inertia is when doing a spin. Recovery can be hard/impossible if you have too much...
Forum: RV-8/8A 05-05-2021, 07:25 AM
Replies: 8
Views: 490
Posted By rv8ch
Lots of great info...

Lots of great info here:

https://www.vansaircraft.com/downloads/#WeightandBalance

11251
Forum: RV-7/7A 05-04-2021, 11:15 AM
Replies: 21
Views: 2,263
Posted By rv8ch
I did it more for my own piece of mind. It was a...

I did it more for my own piece of mind. It was a bit of work, but after so many years without doing real metal fabrication while doing the engine and panel, it was nice to get in there and drill out...
Forum: Safety 05-04-2021, 07:55 AM
Replies: 27
Views: 2,365
Posted By rv8ch
You whippersnappers with your fast modems - I...

You whippersnappers with your fast modems - I started with 110 baud modems and paper terminals, and my "storage" was a paper tape with holes punched in.

Looked something like this, but ours didn't...
Forum: Safety 05-04-2021, 03:24 AM
Replies: 27
Views: 2,365
Posted By rv8ch
I'd say "why not?" Couple of other options - get...

I'd say "why not?" Couple of other options - get a wifi camera that she can look at from time to time, or keep your phone in your pocket.

I have thought of this as I often spend hours alone when in...
Forum: Electronic Ignition Systems 05-03-2021, 11:24 PM
Replies: 3
Views: 285
Posted By rv8ch
Sounds great!

Sounds great!
Forum: Fuel Injection Systems 05-03-2021, 11:16 PM
Replies: 8
Views: 738
Posted By rv8ch
This is what it sounds like to me too. I had one...

This is what it sounds like to me too. I had one ignition wire which worked perfectly sometimes and then badly others, depending on the bend of the wire. Turns out it was the connector between the...
Forum: RV-12/RV-12iS 05-03-2021, 01:10 PM
Replies: 28
Views: 2,126
Posted By rv8ch
And that time could be 6 months or 6 years - and...

And that time could be 6 months or 6 years - and the next guy that owns the aircraft will not know what happened or why.
Forum: ADS-B 05-03-2021, 07:35 AM
Replies: 3
Views: 209
Posted By rv8ch
How do you check the status on the iphone app? ...

How do you check the status on the iphone app? Is this an EchoUAT app?
Forum: RV General Discussion/News 05-03-2021, 04:34 AM
Replies: 19
Views: 1,587
Posted By rv8ch
Practicing patterns with very square corners! ...

Practicing patterns with very square corners! :D

https://www.flightradar24.com/data/aircraft/hb-ymm#2796b9a1

They look more rounded here:

https://uk.flightaware.com/live/flight/HBYMM
Forum: RV-8/8A 05-02-2021, 10:33 PM
Replies: 14
Views: 1,151
Posted By rv8ch
Don't forget that one of the possible situations...

Don't forget that one of the possible situations when you need an ELT is if the aircraft is flipped over or in another "non-standard" position.
Forum: RV Ongoing Maintenance Issues 05-02-2021, 01:27 PM
Replies: 10
Views: 382
Posted By rv8ch
Cool video. Do you a closeup of the gear? It...

Cool video. Do you a closeup of the gear? It might be the angle, but those don't look like my Grove airfoil gear. I had started to video what's happening outside like you are doing, but I...
Forum: Electrical Systems 05-02-2021, 12:38 AM
Replies: 2
Views: 571
Posted By rv8ch
Understanding the electron flow path is extremely...

Understanding the electron flow path is extremely important, no matter what the application - 737 or RV7.

I can confess that in the late 1980s I had a very small part in a project that will remain...
Forum: RV-14 04-30-2021, 08:50 AM
Replies: 18
Views: 1,861
Posted By rv8ch
Since I have Space Shuttle switch guards, I...

Since I have Space Shuttle switch guards, I pretend I'm Bob Crippen at every startup. :D

https://periheliondesign.com/product/organic-handpicked-coffee/
Forum: Electrical Systems 04-29-2021, 02:31 PM
Replies: 55
Views: 6,732
Posted By rv8ch
Just curious - why not? Bob Nuckolls recommends...

Just curious - why not? Bob Nuckolls recommends them for a variety of what seem to be good reasons.
Forum: Electrical Systems 04-29-2021, 02:00 PM
Replies: 55
Views: 6,732
Posted By rv8ch
A "bus" is just a fuse holder or some other...

A "bus" is just a fuse holder or some other method of power distribution - even a wire with a lot of splices could be considered a bus - although not exactly what we want to do in our...
Forum: Electrical Systems 04-29-2021, 09:50 AM
Replies: 42
Views: 2,182
Posted By rv8ch
Indeed - this is working fine for me. The part...

Indeed - this is working fine for me. The part of the engine that the starter bolts to is very clean, flat, un-anodized metal, securely bolted, so is probably conducting pretty good to the engine...
Forum: Electronic Ignition Systems 04-29-2021, 07:28 AM
Replies: 19
Views: 1,435
Posted By rv8ch
That's disappointing. I saw that they were not...

That's disappointing. I saw that they were not dual crimp, but I didn't check the size. :(


Here's a thread with a link to the ETCO connector that Emagair said that they require. I had...
Forum: RV General Discussion/News 04-29-2021, 12:03 AM
Replies: 52
Views: 4,641
Posted By rv8ch
It can be very hot and miserable in there if...

It can be very hot and miserable in there if there is no breeze and it's a humid night. Those dorm rooms only have windows on one wall, so little air circulation. If it's hot, I recommend buying a...
Forum: RV-8/8A 04-28-2021, 11:54 PM
Replies: 25
Views: 1,732
Posted By rv8ch
Totally agree on raising the tail - much easier...

Totally agree on raising the tail - much easier to work back there when it's level and all the blood is not flowing to your head.

To get the baggage area out to inspect the belcrank and autopilot...
Forum: Glass Cockpit 04-28-2021, 08:07 AM
Replies: 136
Views: 31,252
Posted By rv8ch
Very cool feature. This is what I'd like to see...

Very cool feature. This is what I'd like to see with my EFIS - soon as it connects to my wifi, it uploads the files to Savvy. And grabs the updated Jeppesen data. And checks for bug fixes. ...
Forum: Traditional Aircraft Engines 04-27-2021, 11:39 PM
Replies: 31
Views: 2,871
Posted By rv8ch
Félicitations, great to hear that it's better!

Félicitations, great to hear that it's better!
Forum: Traditional Aircraft Engines 04-27-2021, 12:37 PM
Replies: 12
Views: 603
Posted By rv8ch
I doubt you will need to replace the baffles,...

I doubt you will need to replace the baffles, just tune them up a bit. I want to "third" Larry's good advice on checking your timing - something seems off based on your numbers.
Forum: RV-7/7A 04-27-2021, 09:21 AM
Replies: 16
Views: 1,335
Posted By rv8ch
That's for sure! I got a lot of good advice...

That's for sure! I got a lot of good advice before starting my -8 to not fall into the trap of "enhancing" things - and I generally didn't listen, unfortunately. "i'M vErY sMaAaRT!" Eventually I...
Forum: RV-14 04-27-2021, 07:27 AM
Replies: 15
Views: 1,051
Posted By rv8ch
Thanks for the info, Dennis. Not giving me a...

Thanks for the info, Dennis. Not giving me a warm, fuzzy feeling about my fuel pump, but I guess I'll keep my fingers crossed and keep listing for unusual sounds.
Forum: RV-14 04-27-2021, 05:26 AM
Replies: 15
Views: 1,051
Posted By rv8ch
I didn't either - are you sure it's the pump...

I didn't either - are you sure it's the pump beeping? Did it ever work? Perhaps it needs a prime or a little nudge?
Forum: Electronic Ignition Systems 04-27-2021, 02:45 AM
Replies: 16
Views: 9,951
Posted By rv8ch
Ferrule...

Ferrule video.

https://www.youtube.com/watch?v=u9jJqSGMB5g
Forum: Alternative Engines 04-26-2021, 11:53 AM
Replies: 34
Views: 3,714
Posted By rv8ch
But the music was awesome! :D That was some...

But the music was awesome! :D

That was some serious climb performance - 6000 FPM. It would be fun to look at his raw data.
Forum: RV-7/7A 04-26-2021, 01:15 AM
Replies: 16
Views: 1,335
Posted By rv8ch
kit availability

I think you will enjoy building either kit - they are both awesome as are even the "older" kits. One thing to check from Van's is the kit availability - it seems like some parts have quite a long...
Forum: Alternative Engines 04-26-2021, 01:04 AM
Replies: 34
Views: 3,714
Posted By rv8ch
It all depends on how much experimenting you like...

It all depends on how much experimenting you like to do. These numbers are impressive - you just need to make them real in your aircraft. Quite a long road. Not trying to be a buzzkiller, but...
Forum: Safety 04-25-2021, 12:21 PM
Replies: 20
Views: 2,420
Posted By rv8ch
I guess that would only help if there was a...

I guess that would only help if there was a checklist item stating - "If you have to jumpstart the aircraft, don't. Take the aircraft to a good mechanic before flight!"
Forum: Electronic Ignition Systems 04-25-2021, 12:11 PM
Replies: 19
Views: 1,435
Posted By rv8ch
Mine are all 90° on both the plug and the mag...

Mine are all 90° on both the plug and the mag end. I have a parallel valve io-360, and can't say if all engines have their plugs at the same angle, but I think so.

This is the kit I bought and...
Forum: Electronic Ignition Systems 04-25-2021, 12:09 PM
Replies: 19
Views: 1,435
Posted By rv8ch
Mine were the correct length.

Mine were the correct length.
Showing results 1 to 64 of 500

 
Forum Jump

All times are GMT -6. The time now is 01:57 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.