VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.


Go Back   VAF Forums > Search Forums
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Showing results 1 to 64 of 500
Search took 0.03 seconds.
Search: Posts Made By: vfrazier
Forum: Temp / Test / Misc. (posts deleted after 2 weeks) 04-16-2021, 08:15 PM
Replies: 11
Views: 650
Posted By vfrazier
Shipping is a no-win situation for the vendor and...

Shipping is a no-win situation for the vendor and the buyer. Just to be clear, when I say:

So, please don't be too hard on Vans over shipping damage. It's not their fault and it shouldn't be their...
Forum: Temp / Test / Misc. (posts deleted after 2 weeks) 04-15-2021, 02:06 PM
Replies: 11
Views: 650
Posted By vfrazier
As someone who ships a few parts, it's virtually...

As someone who ships a few parts, it's virtually impossible to protect a shipment against monkeys with forklifts. Even the small packages are apt to be destroyed going through the conveyor belt...
Forum: VAF Classifieds (posts in here deleted after 30 days) 04-13-2021, 07:57 AM
Replies: 0
Views: 278
Posted By vfrazier
FS: Cleveland 5.00×5 NOS

Cleveland 5.00×5 NOS

$1350 OBO.

Contact Ray Ward at 4luscombes@gmail.com or...
Forum: Reviews 04-12-2021, 11:42 AM
Replies: 1
Views: 252
Posted By vfrazier
Proud papa! (of Blake, not Paul :rolleyes:)

Proud papa!

(of Blake, not Paul :rolleyes:)
Forum: Rocket 03-31-2021, 09:58 AM
Replies: 6
Views: 313
Posted By vfrazier
Scott, An HR2 will likely have a different...

Scott,

An HR2 will likely have a different center elevator bellcrank, and thus a different stick throw.

My original comments still apply. Sorry. Your best bet is to finalize the autopilot servos in...
Forum: Rocket 03-30-2021, 03:07 PM
Replies: 6
Views: 313
Posted By vfrazier
I have an article on my personal Rocket webpage...

I have an article on my personal Rocket webpage (http://vincesrocket.com/Additions%20after%2010-27-04.htm) that discusses this problem.

Scroll about 1/2 down until you find:
9-1-05: Jim Winings had...
Forum: Rocket 03-30-2021, 03:06 PM
Replies: 6
Views: 313
Posted By vfrazier
DC Dan is correct. The stick travel range will...

DC Dan is correct. The stick travel range will depend on the control stops and the bellcrank mods, if any.

Aside from that, it's possible to make small adjustments by changing the various rod ends,...
Forum: Reviews 03-16-2021, 12:07 PM
Replies: 25
Views: 3,031
Posted By vfrazier
Ross, Adding a service loop of wire like you...

Ross,

Adding a service loop of wire like you describe would be a convenient thing to do. Shielded wire shouldn't be necessary.
Forum: RV-4 03-04-2021, 02:01 PM
Replies: 4
Views: 627
Posted By vfrazier
As cool as my RV-4 runs, and you're in Canada.......

As cool as my RV-4 runs, and you're in Canada.... are you sure you have, or will have, a problem?
Forum: RV General Discussion/News 03-02-2021, 10:43 AM
Replies: 30
Views: 8,084
Posted By vfrazier
For you RV-4 guys out there. Here's a story...

For you RV-4 guys out there.

Here's a story from way back in 1992, when I was but a wee lad, with no money to buy a second canopy bubble.

I caused a crack near the #7 bulkhead. There was a small...
Forum: Reviews 03-02-2021, 10:15 AM
Replies: 25
Views: 3,031
Posted By vfrazier
Actually, it's Blake, my son, at...

Actually, it's Blake, my son, at www.flyboyaccessories.com that sells them.

Blake is FlyLED's/Paul McVitty's U.S. rep. You can meet Paul and Blake at our Oshkosh display in the North homebuilt...
Forum: RV Building Tips/Techniques 02-21-2021, 08:08 AM
Replies: 2
Views: 575
Posted By vfrazier
David always has great ideas, and they...

David always has great ideas, and they work.

I've enlarged the bore of various short pieces of steel and aluminum tubes many times over the years. It usually goes like this:

"That tube doesn't...
Forum: RV Ongoing Maintenance Issues 02-01-2021, 04:04 PM
Replies: 32
Views: 3,986
Posted By vfrazier
This tool works great and fast, but does require...

This tool works great and fast, but does require a bit of finesse (just a bit) to use so you don't chip the cutter (usually by going to fast and tipping the...
Forum: RV Building Tips/Techniques 01-26-2021, 11:22 AM
Replies: 14
Views: 1,459
Posted By vfrazier
+1 for Kahuna's comment My Rocket had a side...

+1 for Kahuna's comment

My Rocket had a side skin air inlet for the front seat and an underwing air inlet, outside of the prop arc, for the rear seat.

On a 95 F day, the front seat received a...
Forum: RV-8/8A 01-19-2021, 11:18 AM
Replies: 7
Views: 1,217
Posted By vfrazier
Katana, Blake has the parts to replace the worn...

Katana,

Blake has the parts to replace the worn ones. They're inexpensive.

www.flyboyaccessories.com
Forum: RV-4 01-17-2021, 08:45 PM
Replies: 332
Views: 399,700
Posted By vfrazier
1994 RV-4 N94VF

1994 RV-4

I was still in my 20's when I built this. Time flies!

https://www.f1aircraft.com/wp-content/uploads/2021/01/RV-4-small.jpg
Forum: RV Building Tips/Techniques 01-17-2021, 08:05 PM
Replies: 10
Views: 1,296
Posted By vfrazier
Local grounds make global problems. They also...

Local grounds make global problems. They also make avionics shops a lotta money.

Take extra care with your wiring and you'll enjoy flying instead of chasing problems.

YMMV!
Forum: RV Ongoing Maintenance Issues 01-17-2021, 07:55 PM
Replies: 25
Views: 5,695
Posted By vfrazier
I'd remove that carpet to have a look. If it's...

I'd remove that carpet to have a look. If it's clean beneath, put it back and look elsewhere.

Are you sure that it's not mold?
Forum: RV Ongoing Maintenance Issues 01-17-2021, 07:50 PM
Replies: 22
Views: 2,182
Posted By vfrazier
Paint protection film is an excellent alternative...

Paint protection film is an excellent alternative to the recommended UHMW flap tape. This product will never yellow; it stays clear for 10+ years and removes cleanly. I used this stuff all over my...
Forum: RV Ongoing Maintenance Issues 01-03-2021, 08:57 PM
Replies: 5
Views: 1,081
Posted By vfrazier
It looks like someone went overboard on reducing...

It looks like someone went overboard on reducing the weight of that control arm! We make several different control arms here, but nothing that thin.
Forum: RV Building Tips/Techniques 12-17-2020, 12:08 PM
Replies: 3
Views: 927
Posted By vfrazier
It works even better if you have a pair of needle...

It works even better if you have a pair of needle nose pliers that are really long and skinny. I don't know if that type of pliers has a specific name, but I submit that "shrink tubing stretchers"...
Forum: RV-7/7A 12-06-2020, 05:25 PM
Replies: 14
Views: 2,041
Posted By vfrazier
It isn't dreadfully difficult and you should have...

It isn't dreadfully difficult and you should have bolt access through a hole beneath the tailcone.

Blake has undrilled springs, important to get a good match on the mounting bolt, at...
Forum: Rocket 12-02-2020, 10:16 AM
Replies: 2
Views: 724
Posted By vfrazier
The HRII tail conversion consists of one drawing,...

The HRII tail conversion consists of one drawing, for the VS and rudder.

There are minor changes to the control surface leading edge rolling to make the "D" cell, but the biggest difference you'll...
Forum: RV General Discussion/News 12-02-2020, 10:08 AM
Replies: 7
Views: 2,154
Posted By vfrazier
I installed SJ on N540VF many years ago and...

I installed SJ on N540VF many years ago and didn't find any particular difficulties.

Read all about it:
http://vincesrocket.com/landing%20gear%20and%20related%20stuff.htm

I sell both styles of...
Forum: RV-8/8A 11-16-2020, 12:03 PM
Replies: 6
Views: 1,094
Posted By vfrazier
Paint is good, but Cerakote is an option too....

Paint is good, but Cerakote is an option too. Check with your gunsmith or other Cerakote shop.

We're doing a lot of our steel parts in Cerakote now as it is corrosion resistant, thin, light, and...
Forum: RV-4 11-16-2020, 11:55 AM
Replies: 10
Views: 1,783
Posted By vfrazier
Screws and Tinnerman U-clips. Be sure to get the...

Screws and Tinnerman U-clips. Be sure to get the proper screws!
Forum: RV-4 11-16-2020, 11:51 AM
Replies: 11
Views: 4,045
Posted By vfrazier
From my Rocket website, here's a couple of...

From my Rocket website, here's a couple of photos, worth a thousand words of speculative "how-to":

flap down
http://vincesrocket.com/2003-06-19/flap%20pushrod%20hole%202.jpg

flap...
Forum: RV Building Tips/Techniques 11-16-2020, 11:45 AM
Replies: 14
Views: 2,564
Posted By vfrazier
The foam brush material is open cell and dries...

The foam brush material is open cell and dries quickly, if it does get wet, which it rarely does unless someone barfs on it. Speaking of the only time that the foam ever got wet in my plane, well, I...
Forum: RV Building Tips/Techniques 11-16-2020, 11:39 AM
Replies: 14
Views: 2,564
Posted By vfrazier
That was possibly me, but I just cut a slit in...

That was possibly me, but I just cut a slit in the foam. Here's the photos from almost 16 years ago. The paint brush foam is reasonably wear resistant and held up well.

Flap pushrod seal 1...
Forum: RV-8/8A 11-10-2020, 01:49 PM
Replies: 11
Views: 2,416
Posted By vfrazier
We have stacks of foam filled scooter tires. All...

We have stacks of foam filled scooter tires. All of them flat spotted under load. If your scooter tire actually stays round after a bit of use, please tell everyone and expect lots of kisses right on...
Forum: RV Building Tips/Techniques 11-10-2020, 01:44 PM
Replies: 14
Views: 2,911
Posted By vfrazier
You might also consider Cerakote, the gun...

You might also consider Cerakote, the gun finishing material. We have a gent here that does many of our parts and it's quite durable.

Unlike powder, if you need to remove it, you can blast it off. ...
Forum: RV-8/8A 11-09-2020, 12:50 PM
Replies: 4
Views: 1,388
Posted By vfrazier
If you just need a throttle quad, Blake has them...

If you just need a throttle quad, Blake has them at www.flyboyaccessories.com
Forum: RV-8/8A 11-09-2020, 12:42 PM
Replies: 11
Views: 2,416
Posted By vfrazier
To be clear, Blake at www.flyboyaccessories.com...

To be clear, Blake at www.flyboyaccessories.com has been the sole source for the Bell fork for several years now. He licensed it from the Bell family. We have all been pleased with the performance of...
Forum: Tip up canopy vs. Sliding canopy 11-02-2020, 12:41 PM
Replies: 2
Views: 4,648
Posted By vfrazier
Phil, I inquired with Bryan Milani about getting...

Phil,

I inquired with Bryan Milani about getting Showplanes to produce a version of their canopy for us.

If you, or others, can make it happen, I'll gladly add their fine canopy set up to the...
Forum: RV-4 10-26-2020, 11:23 AM
Replies: 12
Views: 2,389
Posted By vfrazier
My short legged 4, painted, glass panel, 160HP, w...

My short legged 4, painted, glass panel, 160HP, w Sensenich GA prop weighs 965 pounds on calibrated scales.

1020 may be correct, but it is very common to have aircraft weighed on scales of dubious...
Forum: RV Ongoing Maintenance Issues 10-22-2020, 11:17 AM
Replies: 10
Views: 2,087
Posted By vfrazier
Blake has that info, and more, on his website....

Blake has that info, and more, on his website.

He probably even hijacked Dan's photo of the drilling jig! It is the best photo and worth a thousand words for sure.
Forum: Rocket 10-12-2020, 08:06 PM
Replies: 19
Views: 4,080
Posted By vfrazier
Mark Frederick is making an F1 Indy mount for the...

Mark Frederick is making an F1 Indy mount for the HR2s. This is a very nice upgrade to the stock HR2 gear legs and to the gear leg geometry.

The new mount is roughly $2500 and the required F1...
Forum: Tools 10-12-2020, 07:44 PM
Replies: 12
Views: 2,779
Posted By vfrazier
We're using a super cheap Harbor Freight...

We're using a super cheap Harbor Freight regulator on the Numatx here in our shop. Works fine. KISS principle.

Blake has the Numatx and accessories....
Forum: RV-8/8A 09-27-2020, 06:59 AM
Replies: 7
Views: 2,471
Posted By vfrazier
Formation mirrors...

Formation mirrors (https://www.flyboyaccessories.com/product-p/7201.htm)
Forum: Electrical Systems 09-24-2020, 07:12 AM
Replies: 5
Views: 1,161
Posted By vfrazier
Or email Blake and not wait on the time zone...

Or email Blake and not wait on the time zone difference if Paul is asleep. Blake is Paul's guy in the U.S.

FlyLEDs lighting products (https://www.flyboyaccessories.com/category-s/64.htm)
Forum: RV-14 09-23-2020, 07:30 AM
Replies: 7
Views: 1,908
Posted By vfrazier
Been selling these for years..... rod end tool...

Been selling these for years.....

rod end tool (https://www.flyboyaccessories.com/Rod-End-Bearing-Tool-p/3003.htm) $6.50
Forum: RV-7/7A 09-10-2020, 07:35 AM
Replies: 6
Views: 945
Posted By vfrazier
Check for twist now, then stop worrying about it....

Check for twist now, then stop worrying about it. Pick a couple places where no other rivets or bolts are going to be, check your drawings, then drill a couple holes and put the rivets in.

Important...
Forum: RV-4 09-03-2020, 11:30 AM
Replies: 10
Views: 2,990
Posted By vfrazier
Just contact my son, Blake, at...

Just contact my son, Blake, at www.flyboyaccessories.com
(http://www.flyboyaccessories.com)
Forum: RV-4 09-02-2020, 07:48 AM
Replies: 10
Views: 2,990
Posted By vfrazier
O-320-E2D; Sensenich GA Carbon Fiber prop; fully...

O-320-E2D; Sensenich GA Carbon Fiber prop; fully painted and primed internally; Cloth seats; 2 screen VFR glass panel; Manual trim and flaps; regular battery on the floor between the rudder pedals....
Forum: RV Ongoing Maintenance Issues 09-02-2020, 07:33 AM
Replies: 14
Views: 2,744
Posted By vfrazier
+1 for Tom's comments. Indeed, the price of...

+1 for Tom's comments.

Indeed, the price of those tubes is breathtaking, but they are worth it.

Nothing is worse than rushing to the airport only to find low tires. Ugh.
Forum: RV-4 08-26-2020, 08:16 AM
Replies: 37
Views: 8,317
Posted By vfrazier
I learned in a C-152. 50-ish hours in that...

I learned in a C-152. 50-ish hours in that under-powered, sweat hog. Then I had the next 50 hours in Cubs, Champs, and Cessna 170s. Compared to any of those, flying my new RV-4 with about 100hr TT...
Forum: Rocket 08-08-2020, 04:28 PM
Replies: 43
Views: 17,219
Posted By vfrazier
Anything is possible, depends on how crafty you...

Anything is possible, depends on how crafty you are. I'm no RV-8 expert, but I doubt that the flat wrap w/s is gonna play nice with your RV-8 forward baggage compartment.

Any more posts on RV-8...
Forum: Tools 07-16-2020, 09:54 AM
Replies: 17
Views: 2,562
Posted By vfrazier
Or talk to Blake at www.flyboyaccessories.com He...

Or talk to Blake at www.flyboyaccessories.com He carries the Numatx AND the MUCH nicer SS braid, flexible hoses. (https://www.flyboyaccessories.com/product-p/2702.htm)
Forum: Rocket 07-06-2020, 02:01 PM
Replies: 5
Views: 1,928
Posted By vfrazier
No. It caught my eye also. I could take darn near...

No. It caught my eye also. I could take darn near anything that I could put in the backseat.

OTOH, it eliminates the bubbas from wanting a ride, which can be a plus. :D
Forum: RV Building Tips/Techniques 07-06-2020, 01:42 PM
Replies: 13
Views: 2,896
Posted By vfrazier
Yeah, practice helps... but so do some of the...

Yeah, practice helps... but so do some of the tricks that you learn that aren't in the AC43-13-1B... like whacking the buck tail with a hammer while your gunner tells you when it looks about right....
Forum: RV-12/RV-12iS 06-21-2020, 07:55 PM
Replies: 13
Views: 3,635
Posted By vfrazier
The leading edges of my 26 year old RV-4 are...

The leading edges of my 26 year old RV-4 are black. They wrinkle in the sun on hot days until the temps equalize. As Scott said, no worries.
Forum: RV General Discussion/News 06-21-2020, 07:48 PM
Replies: 8
Views: 2,167
Posted By vfrazier
Mark left out mentioning the B-29 radius inlet...

Mark left out mentioning the B-29 radius inlet profile we're using. It was B-29, wasn't it? :D
Forum: RV-4 06-16-2020, 09:49 PM
Replies: 21
Views: 8,833
Posted By vfrazier
My short legged 1994 RV-4. I've changed quite a...

My short legged 1994 RV-4. I've changed quite a few things on the old Indian, but the short gear isn't on the list, nor will it be. It just isn't worth the $$ and...
Forum: RV General Discussion/News 06-15-2020, 04:23 PM
Replies: 12
Views: 2,642
Posted By vfrazier
I've seen worse......:D

I've seen worse......:D
Forum: Tools 06-13-2020, 07:07 PM
Replies: 9
Views: 1,181
Posted By vfrazier
I'm obviously biased... being Blake's dad....

I'm obviously biased... being Blake's dad. However, the Numatx is a fabulous tool and it is a MUST to have the upgraded hose too.

Contact Blake at www.flyboyaccessories.com
Forum: RV Ongoing Maintenance Issues 06-13-2020, 07:02 PM
Replies: 22
Views: 2,958
Posted By vfrazier
Mike, Don't replace the entire assembly... no! ...

Mike,

Don't replace the entire assembly... no! The fix is probably very simple. First check to make sure that the pin retracts ALL the way into its square hole. If anything is still sticking out,...
Forum: RV Photo/Video URLs 06-13-2020, 06:45 PM
Replies: 8
Views: 1,100
Posted By vfrazier
Good grief, even an RV-8 is still good for a few...

Good grief, even an RV-8 is still good for a few "Yeeeeehaws!"

But those Rockets, yeah...............
Forum: RV-9/9A 06-09-2020, 10:26 AM
Replies: 16
Views: 2,181
Posted By vfrazier
Very common. You can try various things to...

Very common.

You can try various things to dampen it. Report what works!

When I'm the passenger in my friend's RV-6, I like to put my foot on and off the floor rhythmically until my friend says...
Forum: Propellers 06-09-2020, 10:22 AM
Replies: 30
Views: 4,940
Posted By vfrazier
Sensenich does indeed have a 12" spinner. I have...

Sensenich does indeed have a 12" spinner. I have one.

I didn't care for the improper fit of the 13" spinner on the old style cowling. Sensenich was VERY HELPFUL and provided a 12" spinner. The...
Forum: RV General Discussion/News 06-02-2020, 04:21 PM
Replies: 22
Views: 2,653
Posted By vfrazier
Blake (my son :D ) hooked me up with a full set...

Blake (my son :D ) hooked me up with a full set of FlyLEDs for my 1994 RV-4. The installation went smoothly and I am very happy with them. The first flight was in the late afternoon and the ground...
Forum: RV General Discussion/News 05-27-2020, 12:46 PM
Replies: 8
Views: 1,328
Posted By vfrazier
If you have any questions, why not just ask the...

If you have any questions, why not just ask the experts at Phlogiston? I just talked to Tammey on a different topic, they are making Rocket spar sets for us, and she and Wayne are very...
Forum: RV-14 05-21-2020, 10:01 AM
Replies: 37
Views: 6,127
Posted By vfrazier
Let's specify which Rocket. HRIIs are prone to...

Let's specify which Rocket. HRIIs are prone to nose over. F1 Rockets are not. The F1s have a different gear geometry with the tires slightly forward.
Forum: RV General Discussion/News 05-21-2020, 09:57 AM
Replies: 16
Views: 2,020
Posted By vfrazier
It's been a few years since I used them, but I...

It's been a few years since I used them, but I have nothing but good to say about Divco and Aircraft Specialty Services.
Forum: RV-4 05-18-2020, 01:10 PM
Replies: 6
Views: 1,029
Posted By vfrazier
[QUOTE=Sanch627;1431304]Great idea, gettin...

[QUOTE=Sanch627;1431304]Great idea, gettin started on a 4 project when Vans starts shipping parts, question, does it require a nudge to collapse when closing the canopy, or just move on its...
Showing results 1 to 64 of 500

 
Forum Jump

All times are GMT -6. The time now is 04:20 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.