VAF Forums

VAF Forums (https://vansairforce.net/community/index.php)
-   Electronic Ignition Systems (https://vansairforce.net/community/forumdisplay.php?f=103)
-   -   single PMag plug wiring (https://vansairforce.net/community/showthread.php?t=76399)

algrajek 09-09-2011 10:11 AM
single PMag plug wiring
 
Does anyone have an opinion on how to wire the spark plugs with one Mag and one PMag?
PMag to just Bottom or top? Or just like the Mags, with 2 to the top plugs and 2 to the bottom Plugs?
Thanks
AL

Brantel 09-09-2011 10:17 AM
The recommendation is Pmag top regular mag bottom. Something to do with flame propagation.

guccidude1 09-09-2011 10:58 AM
single PMag plug wiring
 
Al: My new Pmag (114) came with the auto plug wires attached and cut to length and booted for top left and lower right. The Pmag seems to function well in that configuration with all the advertised improvements. It has 90 hours in service now. Dan

RV7AV8R 09-10-2011 09:48 AM
Quote:
Originally Posted by algrajek (Post 575596)
Does anyone have an opinion on how to wire the spark plugs with one Mag and one PMag?
PMag to just Bottom or top? Or just like the Mags, with 2 to the top plugs and 2 to the bottom Plugs?
Thanks
AL
You probably will find every possible combination works. I ran my single pmag on the bottom because it seemed the lower plugs fouled easier when I had two regular magnetos. In this configuration I did have no further plug fouling.
Now, I have dual pmags, one up and one down.


All times are GMT -6. The time now is 04:16 AM.