VAF Forums

VAF Forums (https://vansairforce.net/community/index.php)
-   Tools (https://vansairforce.net/community/forumdisplay.php?f=53)
-   -   Engine hoist specs (https://vansairforce.net/community/showthread.php?t=44698)

LettersFromFlyoverCountry 06-19-2009 08:14 AM

Since my kid got held up (during Oshkosh, no less) at gunpoint because of an ad (for video games) on Craigslist, I make it a point never to give them any business. But thanks for the tip on HF, folks. I'll go visit them today. It'll be better than working.

N941WR 06-19-2009 08:43 AM

Bob,

Check Nothern Tool, they are on sale for $140.
http://www.northerntool.com/webapp/w...5491_200305491

BTW, that is the same hoise I used to hang my engine, the engine on an RV-10, and the engine on a -7A. It is plenty strong and tall enough.

n567vb 06-19-2009 09:07 AM

Did you ask WIP? They may have one you could borrow. I bet that spin training instructor at the end of Bravo with the tri pacer might have one. Someone on the field must have one you could borrow if you just need it for a few hours.

Vince

LettersFromFlyoverCountry 06-19-2009 05:06 PM

Quote:

Originally Posted by N941WR (Post 335426)
Bob,

Check Nothern Tool, they are on sale for $140.
http://www.northerntool.com/webapp/w...5491_200305491

BTW, that is the same hoise I used to hang my engine, the engine on an RV-10, and the engine on a -7A. It is plenty strong and tall enough.

Great, there's one just down the street. I'm going to buy rather than borrow. I'm going to try to build a tool crib for RV builders in Minnesota and that would make a good item to add.


All times are GMT -6. The time now is 08:28 AM.