AeroLeds technical
 

Dean:

I'm looking for installation drawings for the Aeroleds products.

I'm most interested in current draw and wiring architecture: I assume that the strobe and position lights powered from separately fused circuits.

A drawing is worth a thousand words...

Thanks, Vern Little

Hello Vern,

Our product datasheets can be found here:
http://www.aeroleds.com/Portals/53/P...0Datasheet.pdf
http://www.aeroleds.com/Portals/53/P...heet%20(2).pdf
http://www.aeroleds.com/Portals/53/P...0Datasheet.pdf
http://www.aeroleds.com/Portals/53/P...0Datasheet.pdf
http://www.aeroleds.com/Portals/53/P...0Datasheet.pdf
http://www.aeroleds.com/Portals/53/P...0Datasheet.pdf

Installation manuals are here:
http://www.aeroleds.com/Portals/53/P...l%20Manual.pdf
http://www.aeroleds.com/Portals/53/P...l%20Manual.pdf
http://www.aeroleds.com/Portals/53/P...l%20Manual.pdf
http://www.aeroleds.com/Portals/53/P...20Manual_2.pdf
http://www.aeroleds.com/Portals/53/P...l%20Manual.pdf

The molex connector crimping instructions are here:
http://www.aeroleds.com/Portals/53/P...tor%20Pins.pdf

If you need any help with wiring, I can provide some sample schematics and assist with any questions you might have.

Dean Wilkinson
CTO, AeroLEDs LLC

Aveoleds
 

Dean,

Do you have the install manuals for the NS90 also?

Thanks,
Gerry

Aeroleds Correction
 

Sorry Dean. I was planning on using the Aveo leds but have decided to use Aeroleds instead.

Gerry

Hi Gerry,

The datasheet is online now, but the installation manual hasn't been posted yet. It should be online soon.

Dean Wilkinson
CTO, AeroLEDs LLC