Tip: Good videos on making hoses
 

I've wanted to try making some hoses for my RV-8, so I read everything here and dug up a lot of sources of fittings, hose material, tools etc. but was still confused about what it takes. Yesterday I found some videos that show how to do it pretty well. It really does not look that hard, even cutting the hose.

Page with videos on making -6 hose, cutting hose, and source of fittings
http://www.myspace.com/earlsstore1

#6 swivel seal hose assembly
http://www.youtube.com/watch?v=aDSozy6MZto&eurl=

Source for materials and tools:
http://www.anplumbing.com/

It may be time to order some hose and fittings and give it a try. The hard part now is deciding which aeroquip hose to buy. I want to replace some 3/8" tubing in my fuel system to make a good Andair installation even better, and I want to make some -4 hoses to spiff up the brake system.

Here's a company that helped me a lot finding some male-female AN-6 swivel connectors. Great service and very helpful:
http://www.suprasport.com/index.html

Hoses/Fittings
 

Try www.summitracing.com www.jegs.com get the Kool kit from Van's or ACS, or the two sites above. Really not hard to do at all.
Mike H 9A/8A