VAF Forums

VAF Forums (https://vansairforce.net/community/index.php)
-   RV-8/8A (https://vansairforce.net/community/forumdisplay.php?f=6)
-   -   POH example request (https://vansairforce.net/community/showthread.php?t=186308)

RVee6 08-28-2020 11:25 AM

RV-8 POH example request
 
I am starting to think about creating a POH for the RV-8 that I am building. I will be installing a Lycoming O-360 and a CS prop that I bought through Van's. I would very much appreciate seeing some POH's that other have created to help me create one for my plane.
Thanks, Charlie

Mike S 08-28-2020 12:31 PM

From the front page;

https://vansairforce.net/poh.htm

RVee6 08-28-2020 06:07 PM

Thanks Mike, I saw that page, only one of the links worked, the -8 in Italy. That is a very nice POH, but it has a fixed pitch prop, which still gives me some good guidance. I was hoping to see some other examples to get a comparison.
Charlie

YvesCH 09-01-2020 01:35 AM

Quote:

Originally Posted by RVee6 (Post 1458022)
I am starting to think about creating a POH for the RV-8 that I am building. I will be installing a Lycoming O-360 and a CS prop that I bought through Van's. I would very much appreciate seeing some POH's that other have created to help me create one for my plane.
Thanks, Charlie

I can send you mine if you want.. Still Fixed Pitch but you have something to compare..

Just send me your mail as a private message and I forward it... If you want I send you my Maintenance Manual as well..

RVee6 09-01-2020 04:13 AM

Thanks Yves, PM sent

hpmicrowave 09-01-2020 07:14 AM

RV8 POH
 
Charlie, I just finished my POH and have same engine, prop as yours. Will forward for your use and review (feedback is welcome).

Send PM with email.

Carl Froehlich 09-01-2020 07:53 AM

Charlie,

PM me your email address and I’ll send mine.

Carl

RVee6 09-01-2020 11:26 AM

Thanks Cecil and Carl, PM's have been sent!

smithflys23 09-01-2020 12:07 PM

May I be included?
 
May I be included?
I'd like to compare Carls, to my own. I will be upgrading to a CS speed propeller in the near future.

RVee6 09-01-2020 12:45 PM

Hi smithflys 23,
I'm waiting to hear back from Carl, however, I won't share anyone's work without their permission, I suggest that you PM Carl and request that information from him. Best of luck with your upgrade!
Charlie

RVee6 09-03-2020 04:05 AM

Thank You!
 
I would like to sincerely thank everyone who shared their POH's with me. They were all amazingly well done and I will have no trouble constructing my own POH from all the wonderful examples. What a great forum!
Charlie


All times are GMT -6. The time now is 05:31 PM.