![]() |
Tailwheel training around New York?
Does anyone know of a good place to get a tailwheel enforcement around the New York area?
Thanks Shawn. |
I think they have a tail dragger at Andover NJ.
|
Quote:
Oliver |
Depends where in NY
Great barrington mass isn?t that far from areas in New York and they are awesome people and great school. |
They have tailwheel training at Andover Aeroflex (NJ). I have heard nothing but great things about Damien and their training program.
|
I flew with Damian a few years ago and must be the one dissenting opinion. I did about 7 hours (one hour per trip out there) of training with him and never even got to wheel landings. Not sure I could tell you what the problem was but I am pretty sure I flew the plane the entire time I was in it. I found it very difficult to feel like I was learning anything from him when I couldn't get a lesson each weekend or twice a weekend. He would schedule me every 2-3 weeks and then we would have a weather day mixed in there from time to time. I believe I "trained" with him for 7 months and never did a single wheel landing. 7 months is almost as long as it took me to get my PPL! I found the whole process to be a tremendous waste of time. I DID like flying the Cub though so at least I got to log 7 hours in a J3.
I ended up going to Florida for a week of vacation and got my TW endorsement AND my transition training all in about a day and a half with Jan Bussell (sp?). Then I drove north to see my family for the rest of the week. I am now the happy owner of a beautiful RV-7 and have somewhere around 400 hours in it. |
Andy! when we going flying? My plane is down for FI swap.
D |
Quote:
We certainly should get some airtime in since we are so close. I just have way too many hobbies to plan ahead most of the time. What's the best way to get you on short notice? |
Feel free to hit me on via cell. Will shoot you am IM with my details. The plane (when flying) has been a dream! I just finished up a FADEC to FI swap so I have been out of commission for 2 months. but I should have it flying this weekend (fingers crossed). Need to replace a mag.
D |
| All times are GMT -6. The time now is 11:42 AM. |