VAF Forums

VAF Forums (https://vansairforce.net/community/index.php)
-   Fuel Injection Systems (https://vansairforce.net/community/forumdisplay.php?f=94)
-   -   SDS vs. Titan EXP FI (https://vansairforce.net/community/showthread.php?t=143274)

rv6ejguy 11-02-2016 09:02 AM

We're getting close to clearing a massive order backlog by next week and I finally had a chance to update some of the web pages this morning. There are some new photos on the Lycoming Page: http://www.sdsefi.com/lycoming.htm

These show Marvin McGraw's super clean installation on his IO-390 which may give some others some good ideas for their installations. Thanks Marvin!

I also put some ballpark system pricing on the page because many folks were asking for those. Fixed a dead link for the aviation manuals and updated others.

Thanks to our customers for being patient through the last couple months. It has been a trying time for us to expand production while getting new designs, features and software releases done while prepping for another ECU board run, building and installing new work benches, PC upgrades, shop cleanup and training some new contractors while my business partner worked through some family issues. Busy would not describe the last while here.

I've unfortunately had little chance to fly my 6A lately, hope I can do some more of that later this month.

KatanaPilot 01-16-2017 10:07 PM

Did they fit?
 
Quote:

Originally Posted by rv6ejguy (Post 1123634)
A customer with ECI cylinders will be receiving his kit next week and verify the screw-in injectors fit these ok. Detailed photos make it look like they will fit but only trying them will confirm.

I will be out at an engine shop in the next 10 days regarding some other matters but I'll try to test fit the injectors on all brands of cylinders I can find in their shop while I'm there. Will report my finding here.

It's not so easy to change from a single to dual ECU after installation but doable. There is a lot of extra wiring, sensors and switchgear to install and the programmer would need to be changed for the dual access type. The Hall sensor mount accepts both single and dual type sensors though so that can remain as is.

Wondered if your screw-in injectors worked on the Titan/ECI cylinders.

rv6ejguy 01-16-2017 10:39 PM

Quote:

Originally Posted by KatanaPilot (Post 1142472)
Wondered if your screw-in injectors worked on the Titan/ECI cylinders.

Only tried on parallel valve Titan cylinder so far. Seem to fit the same as factory Lycoming ones.


All times are GMT -6. The time now is 08:42 AM.