VAF Forums

VAF Forums (https://vansairforce.net/community/index.php)
-   Glass Cockpit (https://vansairforce.net/community/forumdisplay.php?f=35)
-   -   Trim Position through VP-X or G3X? (https://vansairforce.net/community/showthread.php?t=139212)

SMO 06-24-2016 02:11 PM

The G3X autopilot servos have built in auto-trim. If you or some future owner wish to use this feature it might be best to wire the trim through the G3X.

Captain_John 06-24-2016 02:16 PM

Quote:

Originally Posted by SMO (Post 1090245)
The G3X autopilot servos have built in auto-trim. If you or some future owner wish to use this feature it might be best to wire the trim through the G3X.

The G3X will still auto trim if you run the wires through the VPX. It does on mine!

:cool: CJ

Brantel 06-24-2016 02:39 PM

Like CJ says, the VP-X works fine controlling the trim servos along with the G3X's ability to auto trim the plane.

grayforge 06-24-2016 03:02 PM

As these guys said. I'm setting my plane up with Auto-Trim. The Servos do the trimming since they are inline with the VP-X trim lines. The position outputs going to either the VP-X or G3X don't have any bearing on auto trim.


All times are GMT -6. The time now is 08:53 AM.