![]() |
Any VAF discounts? :)
|
Hey Jim this is Trevor. I agree, I also think these would be a good course for anyone installing in the Garmin G3x system. It would teach you proper wiring techniques, how a CAN bus works, and proper configuration of the installed equipment.
|
LINK!
|
Just signed up, hope to see some of you guys there!
|
I understand that in the past Garmin has given out Seminar Bonus Bucks which helped offset the cost of the course. Don't know about their current policy. Got my fingers crossed thou ....
Cheers Jim With regards to the basic wiring course, I learned a lot. Most of the class were licensed A&P’s or people in the industry doing licence renewals and upgrades. I haven’t worked that hard on a course in a long time. I was partnered up with a really sharp A&P (fellow VAF'r - Tnikkel5) working for a small GA shop in the midwest. We learned pin diagrams with wiring requirements, tooling, how shielding worked and built. We then assemblied every harness from scratch (GMA 340 audio panel, GNS 530 NAV/COM/GPS, Mid-Continent CDI, Sandia Altitude Encoder, headset jacks, including C/B’s and avionic master switch). Install, ring out and then test it. Everything worked and NO smoke … woohoo!!! As Trevor mentioned above, taking the G3X course combined with the basic wiring I hope to be in good shape for the panel portion of the build. [IMG] [/IMG][IMG] [/IMG] |
Hello everyone. I'm the one teaching the course. It will be a pleasure to meet those of you that attend. I'll let you guys know about the seminar bucks thing as soon as I can. If there are any other questions, please feel free to ask.
|
Attending
I have signed up. I'm looking forward to learning and to meeting fellow RV/VAFers.
Cheers, Jim |
I just signed up for the course also. Any chance anybody will be around there Tuesday evening and could give me a ride from the airport two miles away? I will by flying my '56 172 in from Michigan.
Bill |
I arrive around 915pm, is that too late? Otherwise I'm happy to pick you up.
|
Jim, Pahan,
This course looks great, a question: I already have a G3X panel in my plane, professionally installed. I continue to bring it back to installer for additions/upgrades (two so far) but would like to be able to do this myself, the course could pay for itself quickly. Might this be a good course for me? Thanks, Craig |
| All times are GMT -6. The time now is 11:56 PM. |