Page 2 of 2
<
1
2
Show 40 post(s) from this thread on one page
VAF Forums
(
https://vansairforce.net/community/index.php
)
-
Traditional Aircraft Engines
(
https://vansairforce.net/community/forumdisplay.php?f=21
)
- -
ECI Factory Visit
(
https://vansairforce.net/community/showthread.php?t=132248
)
pazmanyflyer
12-07-2015 10:51 AM
Quote:
Originally Posted by
Kyle Boatright
(Post 1034967)
... But the assembly process was pretty much as you described - the barrel was in a fixture, the head came out of an oven and a tool was used to spin it down on the barrel - it turned freely.
Like this...
https://youtu.be/s4-gJVGpT-s
All times are GMT -6. The time now is
01:45 AM
.
Page 2 of 2
<
1
2
Show 40 post(s) from this thread on one page