VAF Forums
Page 36 of 38 « First < 263435 36 3738 >
Show 40 post(s) from this thread on one page

VAF Forums (https://vansairforce.net/community/index.php)
-   Glass Cockpit (https://vansairforce.net/community/forumdisplay.php?f=35)
-   -   Garmin G3X Touch Feature Wish List (https://vansairforce.net/community/showthread.php?t=121861)

flion 06-10-2020 02:30 PM
Sure enough, I guess I didn't read the 400+ page manual closely enough. :p Ok, now I'mma happy camper. Thanks for that.

Flavio Camelier 07-26-2020 08:40 AM
Wish list for VFR users outside the US
 
Two wishes:

1> Allow a GTR 200 B radio to be fully controlled from the G3X screen when an audio panel is not installed, which would allow it to control music, bluetooth connections, intercom settings, etc...

2> Enable the G3X system to update Metars and weather through an active internet connection via a mobile device running Garmin Pilot. This is specially useful for countries where FIS-B and Sirius coverage does not exist.

Thanks !

lr172 07-26-2020 09:54 AM
Quote:
Originally Posted by g3xpert (Post 1435903)
Good Morning,

If you open up the configuration menu on the GDU, and select Engine & Airframe, then select a Fuel Input, there is a selection for Display Options. Change this to Separate and you should be able to display your fuel gauge as described.



Thanks,

Justin
It would be nice if you put the fuel remaining (from totalizer) after the “fuel qty” label. That would free up a data field for me to use for n something else.

FitzRX7 09-21-2020 06:40 PM
I might be missing a setting, but on the map view it would be nice when layering the radar to be able to only have regional radar displayed (Like in the WX page) and not the combined radar which lots of times ends up looking like skittle vomit.

Thanks!

Fitz

cderk 09-22-2020 04:24 AM
Quote:
Originally Posted by FitzRX7 (Post 1464093)
I might be missing a setting, but on the map view it would be nice when layering the radar to be able to only have regional radar displayed (Like in the WX page) and not the combined radar which lots of times ends up looking like skittle vomit.

Thanks!

Fitz
That option is definitely in there... was looking around the other day and I saw you can switch from combined to just regional.

cderk 09-22-2020 04:26 AM
Mute Alerts
 
As someone who flies into mountainous areas in the northeast as well as down the Hudson River corridor, it would be great to have a “Shut Up Betty” button where you can temporarily mute Terrain and Traffic alerts for a specified period of time, or until the next power reset WITHOUT having to disable the alerts.

BCP Boys 09-22-2020 06:18 AM
Quote:
Originally Posted by cderk (Post 1464156)
As someone who flies into mountainous areas in the northeast as well as down the Hudson River corridor, it would be great to have a “Shut Up Betty” button where you can temporarily mute Terrain and Traffic alerts for a specified period of time, or until the next power reset WITHOUT having to disable the alerts.
Another request for the Temporary "Shut Up Betty" Button :D

And if you can just sell that button, sort of like the Easy Button that Staples sells, I would like to take a few of those and place them around some politicians :rolleyes:

Tom023 09-22-2020 08:50 AM
Quote:
Originally Posted by cderk (Post 1464156)
As someone who flies into mountainous areas in the northeast as well as down the Hudson River corridor, it would be great to have a “Shut Up Betty” button where you can temporarily mute Terrain and Traffic alerts for a specified period of time, or until the next power reset WITHOUT having to disable the alerts.
+1 and I live in southeast Texas. :D

Bavafa 09-22-2020 09:00 AM
It would be a great feature to have elevator trim adjusted automatically based on your flap settings. Garmin already has all the inputs from both flap and trim and it seems this would be not too complicated to set this up and it would be great feature.

Walt 09-22-2020 09:57 AM
Quote:
Originally Posted by Bavafa (Post 1464209)
It would be a great feature to have elevator trim adjusted automatically based on your flap settings. Garmin already has all the inputs from both flap and trim and it seems this would be not too complicated to set this up and it would be great feature.
It will already do that if the AP is on with autotrim installed, but it just uses altitude/attitude not flap setting to maintain 'trim'.


All times are GMT -6. The time now is 03:26 PM.
Page 36 of 38 « First < 263435 36 3738 >
Show 40 post(s) from this thread on one page