![]() |
fixed?
Well, I'll just have to put this in the "What the H3LL?" folder.
After swapping various things to various ports and verifying everything is OK, and all setup menus look OK.... I connected a test lead from the transponder case to ground. It worked. No more red X and there is serial communication. Powered it off, removed the test lead, powered it back on..... still works. WTH? Even before connecting a test lead from the case to ground, I had good continuity. So, I don't know. I'm moving on. |
Recycled Electrons
That will teach you to not use sub standard aftermarket low grade non-mill spec recycled electrons!! :D
|
Quote:
|
I have the transponder Trig TT22 and I tried to connect it on the skyview but it does't work.
I called Trig support who confirmed me that it is not possible. It's not the same software between both units. Either SV-261 with Skyview, or Trig TT22 with his panel controller.:mad: |
| All times are GMT -6. The time now is 08:38 AM. |