VAF Forums

VAF Forums (https://vansairforce.net/community/index.php)
-   Southeast (https://vansairforce.net/community/forumdisplay.php?f=65)
-   -   Inconel welder (https://vansairforce.net/community/showthread.php?t=191451)

Jab 01-22-2021 11:00 AM

Inconel welder
 
Hi all

I am in the Knoxville area, where finding someone who can weld an exhaust is difficult, so I am looking farther afield. Is there anyone in the Atlanta/Falcon Field area that could make two welds on an exhaust for me? I have to change the angle of the exhaust to clear the airframe, so a 4 degree angle change is needed, I can make the cut to get the angle correct. Should be two simple welds to join the pieces again. If anyone knows of a welder, please let me know.

Thanks,

Gary

dpansier 01-22-2021 11:28 AM

Contact Jody, he is in the ATL area.

https://www.weldingtipsandtricks.com/Jody.html

ty1295 01-22-2021 12:40 PM

If you can't find someone close, we can make it happen in Louisville, Ky area.

terrye 01-22-2021 06:29 PM

Inconel welder
 
The most common exhaust material is 321 stainless steel. Inconel is used for much higher temps.

Jab 01-23-2021 07:31 AM

Thank you for the suggestions, I will be in contact.


All times are GMT -6. The time now is 01:15 PM.