Part# help please

[dreed]

Hi All-

I am not near my project/plans and I need to order a couple replacement parts that I cannot seem to locate in the new/improved Vans store. I may just make them when back but if they are cheap enough I can order/pick them up.

I am looking for the angle that rivets to the fuse that holds the vent brackets- found this pic on a build log.

If anyone has it I'd greatly appreciate it.

 

[terrye]

Part # help please

F-793 L&R Make from AA3-032 x 3/4 x 3/4

 

[BillL]

F-793

Is a make-from part. Make from AA3- 032-3/4 X 3/4.

 

[dreed]

Thanks to you both! Sorry, my project took a ~9ish year hiatus and I guess I made them so long ago I forgot that I had to make them.

Thanks again-
dan

 

[wirejock]

Vent brackets

Seems like I made them from wider stock because the edge distance was short but it might have just been cut longer. Slept since then. Bottom line, measure the distance accross the four side skin rivets and add edge allowance.