VAF Forums

VAF Forums (https://vansairforce.net/community/index.php)
-   RV-8/8A (https://vansairforce.net/community/forumdisplay.php?f=6)
-   -   RV-8 and Catia/Solidworks (https://vansairforce.net/community/showthread.php?t=93827)

pierrick 12-05-2012 03:57 AM

RV-8 and Catia/Solidworks
 
Hi
We are an aeronautical engineering school in France and are planning to built a RV8, but although to create a virtual factory.
Therefore we are looking for any catia or solidworks models of the rv8 to prepare task cards for the assembly
Thank you for your (future) help

Bastien 12-05-2012 09:49 AM

Hi Pierrick,
Welcome to VAF,
I am a French RV8 owner in an engineering school and I also want to have a CATIA/Solidwork model to improve the efficiency of the plane.
I sent you an e-mail, hoping that I could help you a bit in your project.

Hoping that someone already did the job and want to share it.

pierrick 12-05-2012 10:48 AM

Thank you for your quick answer


All times are GMT -6. The time now is 04:39 PM.