VAF Forums

VAF Forums (https://vansairforce.net/community/index.php)
-   RV-9/9A (https://vansairforce.net/community/forumdisplay.php?f=5)
-   -   Brake Installation, Main Gear 9A (https://vansairforce.net/community/showthread.php?t=104979)

Mark C. 10-03-2013 11:38 AM

Brake Installation, Main Gear 9A
 
Looking for some support, pictures or drawings showing the installation of the brake / caliper assembily on gear leg. Using Matco wheels and caliper with their upgraded axel. Will be using Bonaco flex hose. Vans just does'nt have a good drawing for proper orientation dipiction. Thanks, Mark C. RV9A 119RV Chicago Area

mikehoover 10-03-2013 12:28 PM

Hope these will be of some help:

View looking down on right wheel:
http://www.aclog.com/rv-9a/images/Fi...5_DSC_1146.JPG

Another view:
http://www.aclog.com/rv-9a/images/Fi...0_DSC_1139.JPG

bruceh 10-03-2013 01:58 PM

I've got some photos of the brakes on my web site.

Mark C. 10-03-2013 08:05 PM

Mike and Bruce... Excellent, I have it now.. The cut in mod on bracket U-810 I missed in the directions.. Thank you both very much..!! Mark C.

bruceh 10-04-2013 01:26 AM

Mark,

You didn't miss any directions! :D

There aren't any for the cut out on the U-810 wheel pant support bracket.

I posted this thread to ask the same question.

airguy 10-04-2013 01:38 PM

Perfect timing - I'm just about ready to start howling like a Wookie and beating something with a club over the same issue...

Mark C. 10-04-2013 08:03 PM

Bruce, thanks again for taking the lead on this issue.. It really is easy when you have good diagrams or pictures. When building this rocket ship you just cant second guess how something goes together... I also contacted Vans on the brake installation their response offered little help.. After 4.5 years of building the problem solving gets tiring... Mark C. RV9A


All times are GMT -6. The time now is 01:45 PM.