What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

G3X and vans stall warning

jtrollin

Well Known Member
Has anyone hooked up the vans stall warning to he G3X instead of a horn?

I would love to know how to do this.

Thanks,
 
Has anyone hooked up the vans stall warning to he G3X instead of a horn?

I would love to know how to do this.

Hello John,

All you need to do it connect the stall warning switch to one of the G3X discrete input circuits, and configure it as "Stall Warning". An attention-getting tone will play when the switch is closed. Simple!

- Matt
 
Hi Everyone,

I have connected the stall warning switch from vans to the G3X input and configured it as such. If I perform a stall the horn remains on about 15sec after the stall is recovered. Is this because there is a timer in the G3X (I could not find something in the menu to adjust) or is my vane too long? It also happens after landing...

Cheers Yves
 
Back
Top