Option ground adjust pedal installation

[denbobp]

After bench building my adjustable rudder pedals, the floorboard angles do not set flat on the bench when everything is tightened up. Since I will have to cherry max these angles to the already built forward fuselage floor there will be a bit of a preload on these angles.

Is there a way to upload photos from an IPAD? I'm sitting in the hanger and tiny pics.com doesn't recognize my files (per insert pic tutorial)

 

[bird]

ground adjust

Mine are installed, they fit just fine. The angles may have a little crook in them when just sitting there, it is probably because of the way they made the offsets on each end to fit on the fuselage angles at the firewall and gear box.
Yours should be fine.

bird