tx_jayhawk
Well Known Member
I'm trying to get purchased some of the miscellaneous control cables for my RV-7A. I have the standard Vans throttle and mixture cables on order, but I am searching for recommendations for the following:
- Cabin heat
- Carb heat
- Parking brake
I've looked at Spruce and Van's and noted a couple of questions:
1) I assume Vans CT A-740 are the same as the spruce A-740?
2) Assuming I am using an O-360, would I want the solid wire end cable or one with a threaded end for the carb heat? I assume the parking brake and cabin heat would be solid end.
3) I would be interested in hearing builder's preferences for "glide free" cables for "detent" cables for each of the three items above. Right now, I am thinking maybe "glide free" for the brake and cabin, then "detent" for the carb heat.
Thanks,
Scott
7A Finishing
- Cabin heat
- Carb heat
- Parking brake
I've looked at Spruce and Van's and noted a couple of questions:
1) I assume Vans CT A-740 are the same as the spruce A-740?
2) Assuming I am using an O-360, would I want the solid wire end cable or one with a threaded end for the carb heat? I assume the parking brake and cabin heat would be solid end.
3) I would be interested in hearing builder's preferences for "glide free" cables for "detent" cables for each of the three items above. Right now, I am thinking maybe "glide free" for the brake and cabin, then "detent" for the carb heat.
Thanks,
Scott
7A Finishing