What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

master cylinder dimensions

rv9aviator

Well Known Member
Can someone tell me what the hole center distance is on their RV-10 Matco brake cylinder? I am modeling the tubes, pedals and cylinders and need the distance between the holes.

Thanks!
The brake pedal guy
 
Using my machinist scale I came up with 2 and 13/16 inches. I measured to the center of the plastic dust plugs. If you need more precision I can pull out the calipers.

This was the hole distance for the lines themselves right?

Rick S.
40185
Fuselage
 
Last edited:
Back
Top