Toobuilder
Well Known Member
OK, did a search but gave up after a while...
I plan on installing a pair of Pmags on the -8 and I intend to follow the basic wiring as called out in the manual (P leads, run off the key switch). Concerning the 12v power lead however, I'm wondering if there is anything wrong with running a single lead off the main buss (fused) to a normally closed (test) switch, then to the first Pmag, then "daisy chain" it over to the second?
I plan on installing a pair of Pmags on the -8 and I intend to follow the basic wiring as called out in the manual (P leads, run off the key switch). Concerning the 12v power lead however, I'm wondering if there is anything wrong with running a single lead off the main buss (fused) to a normally closed (test) switch, then to the first Pmag, then "daisy chain" it over to the second?