Aerosonic Encoding Altimeter Pin out?

I need to find the pin out wiring for an Aerosonic "digitizer" altimeter. The model is 101435. Digging the web I've found that almost all models of Aerosonic altimeters use the same test harness... so I think my model number may not be too critical. With 13 wires (10 used in the cut off harness included) it may take a while to figure this out! [No, Essco does not have a manual for sale - for this model] Thanks.

For future reference and archives, here are the pinout that I have for the "1014" & "1016" series. Do not take this as gospel, but it's what I've got!

A = +28VDC
B = +14VDC
C = Strobe
E = D4
F = A1
G = A2
H = A4
J = B1
K = B2
L = B4
M = C1
N = C2
P = C4
R = Ground

That's all the info I have on those units.

Cheers,
Stein

Can you provide the last five digits of the part number? If so, I can get you the information you need. i.e. 101435-11227

Regards,

Ken

Full part number

The full part number is 101435-01211. Thanks!