PDA

View Full Version : Loctite selection


Mike Raviv
05-25-2009, 08:14 AM
Gents,

I'm final-installing those fuel and brake lines and want to use Loctite on the AN fittings, in both systems. What is the recomended Loctite series for the job, and are there good (but less expensive) brand names that would be equally good?

TNX and
BSTRGRDS
Mike

RV-7A 4X-ORV (res)
Installing systems.

Lycosaurus
05-25-2009, 08:40 AM
As far as I know, AN fittings are to be installed dry. For the pipe thread fittings, I used ezturn (fuelube).

FrankK90989
05-25-2009, 08:46 AM
On pipe threads I used loctite Quickstix 561 PST. Looks like a big chapstick. Hmm I wounder if......
Anyway no leaks.

G-force
05-25-2009, 11:58 AM
For NPT threads, Loctite 567 PST. For the AN sides, dry.